Sponsor Message:

The De Havilland Canada DHC-6 Twin Otter

Country of origin  
Canada

Photos  

Click here for full size photo!
Click for large version.

Photo © Eduard Marmet

More photos of De Havilland Canada DHC-6 Twin Otter

Click here for full size photo!
Click for large version.

Photo © Craig Murray
More passenger cabin photos...

Click here for full size photo!
Click for large version.

Photo © Peter BOROVSZKY
More cockpit photos...

Powerplants  
100 - Two 431kW (578shp) Pratt & Whitney Canada (formerly United Aircraft of Canada) PT6A-20 turboprops driving three blade propellers.
300 - Two 460kW (620shp) P&WC PT6A-27s.

Performance  
100 - Max cruising speed 297km/h (160kt). Range with max fuel 1427km (771nm), range with 975kg (2150lb) payload 1344km (727nm).
300 - Max cruising speed 338km/h (182kt). Initial rate of climb 1600ft/min. Range with 1135kg (2500lb) payload 1297km (700nm), range with a 860kg (1900lb) payload and wing tanks 1705km (920nm).

Weights  
100 - Basic operating empty 2653kg (5850lb), max takeoff 4763kg (10,500lb).
300 - Operating empty 3363kg (7415lb), max takeoff 5670kg (12,500lb).

Dimensions  
100 - Wing span 19.81m (65ft 0in), length 15.09m (49ft 6in), height 5.94m (19ft 6in). Wing area 39.0m2 (420sq ft).
300 - Same except for length 15.77m (51ft 9in), or 15.09m (49ft 6in) for floatplane variants.

Capacity  
Flightcrew of two. Standard regional airliner interior seats 20 at three abreast and 76cm (30in) pitch. Can be configured as an executive transport, freighter, aerial ambulance and survey aircraft.

Production  
Production completed in 1988, and comprised 115 Series 100s, 115 Series 200s and 614 Series 300s.

Type  
STOL turboprop regional airliner and utility transport

History  

Still Canada's most successful commercial aircraft program with more than 800 built, the Twin Otter remains popular for its rugged construction and useful STOL performance.

Development of the Twin Otter dates back to January 1964 when De Havilland Canada started design work on a new STOL twin turboprop commuter airliner (seating between 13 and 18) and utility transport. The new aircraft was designated the DHC-6 and prototype construction began in November that year, resulting in the type's first flight on May 20 1965. After receiving certification in mid 1966, the first Twin Otter entered service with long time De Havilland Canada supporter the Ontario Department of Lands in Canada.

The first production aircraft were Series 100s. Design features included double slotted trailing edge flaps and ailerons that can act in unison to boost STOL performance. Compared with the later Series 200s and 300s, the 100s are distinguishable by their shorter, blunter noses.

The main addition to the Series 200, which was introduced in April 1968, was the extended nose, which, together with a reconfigured storage compartment in the rear cabin, greatly increased baggage stowage area.

The Series 300 was introduced from the 231st production aircraft in 1969. It too featured the lengthened nose, but also introduced more powerful engines, thus allowing a 450kg (1000lb) increase in takeoff weight and a 20 seat interior. Production ceased in late 1988. In addition, six 300S enhanced STOL performance DHC-6-300s were built in the mid 1970s.

All models have been fitted with skis and floats.

Copyright Airliners.net, some information Copyright Aerospace Publications

Related links  

Back to Aircraft Data & History section.

Back to frontpage of Airliners.net

Back to Aircraft Data & History section.
The backbone of this section is from the The International Directory of Civil Aircraft by Gerard Frawley and used with permission. To get your own copy of the book click here.