Sponsor Message:

The Boeing 727-100

Country of origin  
United States of America

Photos  

Click here for full size photo!
Click for large version.

Photo © Andy Vanderheyden

More photos of Boeing 727-100

Click here for full size photo!
Click for large version.

Photo © Miguel Cano Alva
More passenger cabin photos...

Click here for full size photo!
Click for large version.

Photo © Stephen Boreham
More cockpit photos...

Powerplants  
727-100 - Three 62.3kN (14,000lb) Pratt & Whitney JT8D-7 turbofans.

Performance  
Max speed 1017km/h (549kt), max cruising speed 960km/h (518kt), economical cruising speed 917km/h (495kt). Range with max payload 5000km (2700nm).

Weights  
727-100 - Empty equipped 36,560kg (80,602lb), max takeoff 72,570kg (160,000lb).

Dimensions  
727-100 - Wing span 32.92m (108ft 0in), length 40.59m (133ft 2in), height 10.36m (34ft 0in). Wing area 157.9m2 (1700sq ft).

Capacity  
Flightcrew of three (two pilots and flight engineer). Typical two class seating for 94, max seating for 131.

Production  
Of the 582 727-100s built, almost 400 remained in commercial service in late 1998, with 40 more used as corporate jets.

Type  
Short to medium range narrowbody airliner

Schematics  

History  

The 727 short to medium range trijet is the world's second most successful jet airliner built.

Initial design studies began in 1956, although for a time it appeared that a new short/medium range airliner would not be built at all due to Boeing's financial position before sales of the 707 had taken off. Boeing persisted however and serious development of the 727 beginning in June 1959. The program was launched on the strength of orders for 80 from Eastern and United in 1960.

The resulting Boeing Model 727 pioneered the rear trijet configuration, with power from three specially designed Pratt & Whitney JT8D turbofans (although RollsRoyce Speys were originally considered). The trijet design was settled upon as it gave the redundancy of three engines, better climb performance than a twin and improved operating economics over a four engine jet. The 727 also introduced an advanced wing design with the first airliner application of triple slotted Krueger flaps. The 727 retained the 707's fuselage cross section, but with a redesigned smaller lower fuselage due to the need to carry less baggage on shorter range flights, and it has limited parts commonality with the 707 and 720. The 727 was also the first Boeing airliner to feature an APU (auxiliary power unit).

The prototype 727 first flew on February 9 1963, with certification granted in December that year. The first 727 entered service with Eastern Airlines on February 9 the following year.

Development of the initial 727-100 resulted in a small family of sub variants, including higher gross weight options for the basic passenger carrying 727, the 727-100C Convertible and 727-200QC Quick Change, both with a large freight door on the forward left hand side of the fuselage. Many were subsequently converted to pure freighters. The stretched 727-200 is described separately.

Production of the 727-100 ceased in 1973 but one recent notable development was Dee Howard in the USA upgrading a number of 727-100 freighters for express freight operator UPS. The major feature of the upgrade was reengining with RollsRoyce Tays, which improves performance, reduces fuel consumption and more importantly, allows the aircraft to meet Stage 3 noise requirements.

Copyright Airliners.net, some information Copyright Aerospace Publications

Related links  

Back to Aircraft Data & History section.

Back to frontpage of Airliners.net

Back to Aircraft Data & History section.
The backbone of this section is from the The International Directory of Civil Aircraft by Gerard Frawley and used with permission. To get your own copy of the book click here.