Sponsor Message:

Flying the Mighty Lockheed Constellation

By Ralph Pettersen
August 9, 2002

In 1997, Ralph Pettersen - a self-confessed propliner fanatic - was able to realize a life-long fantasy and fly a Lockheed Constellation. His day with the Constellation Group at their Avra Valley headquarters flying their beautiful MATS (Military Air Transport Service) Connie proved even more exciting than he could have imagined!

I grew up in the borough of Queens in New York City during the 1950's and 60's and can well remember the rumble of DC-6's, DC-7's, and Lockheed Constellations making their way into La Guardia and Idlewild Airports. Before the construction of runway 22L at Idlewild in the late 1950's, landing aircraft bound for what is now runway 22R routinely passed over my house at less than 1000 feet. Occasionalpi trips to the old IAB observation deck at Idlewild further fueled my fascination with these wondrous flying machines.
I was fortunate enough to become part of this scene during the summer of 1967 when Saturn Airways hired me as an apprentice mechanic for the summer charter season. Saturn was one of a number of "supplemental" airlines flying charters between New York City and Europe out of the old North Passenger Terminal at JFK.

Click for large version
Click here for full size photo!

Photo © Ralph M. Pettersen: The #2 engine comes to life with a characteristic cloud of smoke!


Others included Capitol, Trans International, Overseas National, American Flyers, Standard, and World Airways along with a steady stream of British charter airlines such as Transglobe, Brittania, and British Eagle. By 1967, piston power was in its twilight, with even the "lowly" supplementals starting to convert to jet powered equipment. While 1968 saw almost a complete conversion to jet equipment, in 1967 most of the fleet was still piston powered. Saturn was no exception and it operated four DC-7Cs on flights to England and Germany that summer (N90773, N90774, N90778, and N90804).
We maintained the four DC-7C's on a ramp adjacent to the old Lockheed Air Service hangars 1 and 2. This location proved ideal for airplane watching since it was less than 150 yards from runway 13L/31R and saw all the comings and goings of exotic aircraft being serviced by LAS at their hangars. I've often lamented the missed photo opportunities due to the lack of a decent camera. This experience cemented my fascination with airliners, especially piston powered ones, and started me on aircraft photography as a hobby.
Fast-forwarding some twenty-five years... During those years I earned a degree in aeronautical engineering, my pilots license, and continued my fascination with flying machines. I attended Oshkosh 1992, arriving in style in a Martin 4-0-4 airliner and was very surprised to see not one, but two Constellations parked next to us on the ramp. The MATS L749A Connie and the Save-A-Connie L1049H Super Connie were both in attendance and attracted large crowds, most of whom probably never had seen a Constellation before. The two Connies' flew most days and their flying exhibition was highlighted one day when they made two passes before the crowd in close formation. Needless to say, the FAA did not approve and this was it not repeated during the remaining days of the show.
While talking to the MATS Connie folks one day, they told me about the flying program offered at their Avra Valley Airport headquarters in Marana, AZ.

Click for large version
Click here for full size photo!

Photo © Ralph M. Pettersen: What a beautiful sight at the Oskhoskh Airshow in 1992.


To see a Connie was exciting to me but to actually fly one would border on fantasy. All that was required was a private pilot's license, a current medical, and $3,995. The first two items were easy... the last one was the tough one and postponed my fantasy for almost five years until March 1997.
In early 1997, with encouragement from my fiancée, Dee Dee, I decided to bite the bullet, spend the money and realize my fantasy. One of the arguments I used to persuade myself was that it would make a great story for Propliner Magazine. Little did I know the events of the day would prove to be less than routine, and indeed make for a rather interesting story.
About a month before my flight, I received an L649/749 aircraft manual from the Constellation Group and was instructed to study it thoroughly in preparation for the ground and flight school portions of the program. Although I had a multi-engine rating, I had never seen an aircraft manual with so much information and was somewhat intimidated by the task in hand. The last thing I wanted to do was to go to Avra Valley and embarrass myself trying to fly this beast. I broke open the books and studied like I hadn't since college days.
As part of the preparing for the Propliner article, I arrived a day early and interviewed Frank Lang, chief pilot of the MATS Connie. Frank has over thirty-eight thousand flight hours with over five thousand in all models of the Constellation. Needless to say, it was a fascinating interview! I had a delightful morning with Frank and, between his flying stories, even managed to get the required background information for my article.
The next morning dawned with a beautiful sunrise and butterflies in my stomach. Dee Dee had decided that a shopping trip to Mexico would be more fun that tagging along with me and she dropped me off at the hangar at 8:00am where I met the other three participants.

Click for large version
Click here for full size photo!

Photo © Ralph M. Pettersen: Waiting for her students on a beautiful spring morning at Avra Valley.


Two were airline pilots and the third was a commercial videographer. Dave flew 747-400s for Cathay Pacific; Clint, 757s for America West. Clint, who was doing his annual proficiency check with Frank, had extensive experience flying this and other Connies along with flying B-17s and DC-3s for the Confederate Air Force. Dave, a Brit, lived in Phoenix and was based out of Hong Kong. What a commute! With these two pros, I was very glad that Bruce, the videographer, had decided to sign up for the program.
We spent the morning in ground school learning the history of the Constellation and basic information about the hydraulic, electrical, emergency, and mechanical systems of the aircraft. Frank spent lots of time discussing Constellation performance parameters and how he wanted us to operate the aircraft. The butterflies didn't go away! How was I ever going to fly the beast and remember all these numbers? I thought back to the days when I thought a Cessna 150 was a complex and intimidating airplane and realized I would do just fine. Lunch was served and then it was time for the preflight inspection.
Tim Coons, lead mechanic and a flight engineer for the MATS Connie, took us through the drill.

Click for large version
Click here for full size photo!

Photo © Ralph M. Pettersen: The massive 18-cylinder R3350 engines of the Constellation.


Even by today's jet standards, this airplane was large. We checked the tires, wheel wells, flight control surfaces, pitot tubes, and many more items too numerous to list. Tim even demonstrated the manual flap extension system located in the main cabin... 276 turns to fully deploy the flaps. The airplane had been used for spraying bugs in Canada when it flew for Conifair and the distinctive odor of the insecticide was still present after all these years. It smells like cat urine and when I first entered the airplane I thought it had been home to a group of stray cats.
The airplane was deemed airworthy and it was finally time to climb on board and go flying. Frank took the right seat and motioned for Dave, the Cathay Pacific captain, to take the left seat.

Click for large version
Click here for full size photo!

Photo © Ralph M. Pettersen: The MATS Connie's beautifully restored cockpit.


Click for large version
Click here for full size photo!

Photo © Ralph M. Pettersen: The Flight Engineer's panel, where the action is!


With Tim in the flight engineer’s position, the lengthy “before engine start” checklist was begun. "Landing gear handle down", "circuit breakers and switches", "brake pressure", "parking brake set", "control boost", "battery voltage 24-28 volts", "crossfeed valves closed", "generators off", and "blowers low" were some of the 45 items that had to be checked prior to engine start. Engines are usually started with #3 and #4 first, then engines #1 and #2. The process involves the one of the pilots counting twelve blades at which time the flight engineer turns the magneto switch to the “both” position. What results is a frenzy of activity by the flight engineer followed by lots of smoke and noise as the engine starts.

Click for large version
Click here for full size photo!

Photo © Propfreak: Typical R3350 engine start with lots of smoke.


One by one the engines were started and we were ready to taxi to the end of Avra Valley Airport’s runway 12. With only one steering wheel, Dave quickly had to get the feel for the steering this 95-foot long airplane since the taxiways at Avra Valley are quite narrow.

Click for large version
Click here for full size photo!

Photo © Andy Martin: Avra Valley's narrow taxiways are quite evident in this picture.


Since he was used to steering the mammoth Boeing 747-400, Dave quickly mastered this skill and we were soon safely at the end of the runway and ready for engine runup. The main landing gear on the Constellation are “walking gear” and the knack for getting the aircraft “on step” during engine runup can be a challenge for the novice Connie pilot. As power was increased during runup, the main gear pivoted and the Connie rose up onto what is called being “on-step”. After completion of the runup, reducing the power to get the Connie back down was tricky, and back in the old days, it was considered poor form to drop the Connie with a load of passengers in the back! With the aircraft “on-step” the “before takeoff checklist” was successfully completed with items such as generators, flaps, prop governor switches, control boost systems, and prop reverse being checked. In addition, the two magnetos on each engine were checked with a maximum allowable drop of 75 rpm.
The aircraft was taxied onto the runway and lined up for takeoff. Flaps were set to 60% and Tim set engine power to 40 inches of manifold pressure and 2,700 rpm. Dave let off the brakes and we started rolling down the runway towards the all-important V1 speed. V1 is the speed at which the pilot still has the option to abort the takeoff and had been calculated by Frank to be 85 knots for today’s flight. We quickly accelerated to 90 knots at which time Dave rotated the aircraft and we were flying.

Click for large version
Click here for full size photo!

Photo © Propfreak: The MATS Connie, one of just a half-dozen remaining flying, takes to the air.


The aircraft accelerated to 120 knots during landing gear retraction after which the flaps were retracted and the aircraft continued to accelerate to 155 knots.
After reaching an altitude of 4000 feet, Frank took each participant through a series of maneuvers. These included 60-degree turns to the left and right and stalls in the clean and gear/flaps down configuration. Being used to flying a rather nimble Beech Bonanza, I was impressed by the heavy feel of the aircraft controls. Even though the control boost system was on, it felt very much like flying a truck.

Click for large version
Click here for full size photo!

Photo © Bob Harrington - Mazama Photographs: Poetry in motion - a Constellation in flight.


I was also amazed that the aircraft could be flown at less than 80 knots indicated and by the gentleness of the stalls. Having completed these preliminary maneuvers, it was now time to see if we could land the beast.
Clint, the B757 driver, was the first to go. We headed 15 miles North to the famous Pinal Airpark in Marana for our first touch-and-go landing of the day. The “before-landing” checklist was completed and we entered the downwind for runway 12 at 1,500 feet and 140 knots. 60% flaps was selected, the landing gear was extended before turning base where flaps were increased to 80% and the airspeed decreased to 120 knots. On final, full flaps were selected and we crossed the runway numbers at 95 knots. Clint’s touchdown was “textbook” after which flaps were retracted to 60% and power increased to the takeoff setting for our takeoff.
We headed back to Avra Valley Airport where the #2 engine, which had been running a little hot, was throttled back to zero thrust for a simulated three-engine landing. The plan was to do a touch-and-go landing at Avra Valley on three engines followed by additional touch-and-go’s by the remaining participants. I was in the cockpit observing the approach and all seemed normal until the gear was being retracted after the touch-and-go when warning lights began flashing and warning horns sounded loudly over the din of the engines. Tim informed the pilots that there was something amiss with the #1 engine, which was confirmed by Clint who reported that the #6 cylinder had blown through the cowling and was being held in place by its ignition wires.

Click for large version
Click here for full size photo!

Photo © Ralph M. Pettersen: An interesting sight, to say the least.


Takeoff power was immediately applied to the #2 engine followed by the feathering and shutdown of the #1 engine. A simulated three-engine touch-and-go had very quickly degenerated into a two-engine touch-and-go. With order restored, Frank flew the aircraft in a normal pattern with a resulting very routine landing. Frank, Clint and Tim had handled this emergency in a textbook manner which was a very remarkable event to witness.
After deplaning, we all got to take a close look at the very large hole in the #1 engine cowling.

Click for large version
Click here for full size photo!

Photo © Ralph M. Pettersen: It was quite obvious that this engine was destined for the scrapheap.


It was obvious that the engine would have to be changed prior to the aircraft attending an airshow scheduled for the next week in Phoenix. As luck would have it, a spare engine from sister ship HI-393 had recently arrived from Santo Domingo and the mechanics would start this task on Monday morning.
The group retired to the hangar for a debrief after which liquid refreshments were waiting on ice. Dee Dee arrived shortly from her shopping trip and was amazed at what she saw. She wasn’t too sure that flying around in old Constellations was such a good idea! Since none of us had logged our three take-offs and landings, plan B needed to be formulated which, for me, meant returning to Avra Valley eight months later in November 1997.
I was back in Avra Valley, AZ on November 15 to complete the takeoff and landing portion of the program. As in March, the morning was spent in ground school and after a thorough preflight we were flying by 1:30 in the afternoon. Frank Lang and Tim Coons, as in the March flight, were the captain and flight engineer. Part of the day’s plan was to certify Al Malecha, a Constellation Group member, as a designated flight engineer examiner. Apparently with so few large piston engine airplanes still flying, it can be a logistics nightmare getting all the right people together for certification rides. Dick Roberts of the Detroit FAA office was with us and the first portion of the flight was spent performing the procedures necessary to certify Al. Part of the process is to shut down an engine in flight and #1 engine was shut down and feathered bringing back memories of the March flight. I talked to Dick after the flight and he remarked that his job had been very easy due to the knowledge and professionalism shown by both Tim and Al.
Next on the agenda were my landings and takeoffs. Needless to say I was a little apprehensive but under the expert guidance of Frank Lang, these were accomplished at the Avra Valley Airport with no damage to the airplane or its passengers. Flying an airplane the size of this one is a challenge for someone more used to flying Beech Bonanzas. Frank handled the radio, landing gear, and flaps so that I could give my full attention to flying the landing pattern. 120 knots on downwind and Frank lowered 60% flaps, which resulted in the need for a little “nose down” elevator trim. 80% flaps on base leg resulted in the airspeed bleeding off to about 110 knots and the need for a slight elevator trim correction. As we turned to final, flaps were lowered to 100% and power was slightly reduced to keep the nose pointed at the end of the runway, which resulted in us crossing over the fence at 95 knots. The controls were much heavier than what I’m accustomed to which caused me to over-control the airplane resulting in, what seemed from the cockpit, a somewhat zigzagged final approach.
Vern Raburn, owner of the MATS Connie, joined us after my landings and we departed Avra Valley. It was now time for Bill and Peter, the other two program participants to fly the Connie. The air work consisted of straight and level flying, steep turns and stalls. After this was completed, we headed to Pinal Airpark for the landing and takeoff portion of the program. This is a very interesting airport since it is the home of Evergreen Airlines and is a major storage facility for old jet airliners. I would guess that there are 100+ airliners from all over the world stored there. Most seem complete but there are some were without engines, wings, and other essential components.

Click for large version
Click here for full size photo!

Photo © Ralph M. Pettersen: Pinal Airpark - the last stop for many obsolete airliners.


With the day’s flying completed, we arrived back at Avra Valley right on schedule at 5pm and Vern asked us if we would like to have a look inside the airport’s other resident Connie, N749VR.
In 1997 this airplane was owned by the Dutch Constellation Society, which planned to restore it to flying condition and fly it to Holland.

Click for large version
Click here for full size photo!

Photo © Ralph M. Pettersen: The "before" photo, takein in 1997.


When we got inside the airplane we were all amazed by its condition. The cabin had been stripped out totally with even the flooring removed. Windows had been exposed to ultraviolet light and were crazed or missing altogether and even the cockpit seemed empty without any seats. The one thing that still looked good was the flight engineer’s control panel. It was interesting to note that some of the original equipment was still in place in the belly from its days flying VIP missions for the USAF. Vern said that the MATS Connie was in similar condition when they got it, which gave us all a true appreciation on how much work has been put into its restoration.

Click for large version
Click here for full size photo!

Photo © Ralph M. Pettersen: Restoration begins in March, 2002 with engine tests using a cut-down C-97 prop.


Fast forwarding to July 2002... after eighteen months of restoration by the Dutch Aviodome Museum, the beautifully restored Connie, now registered N749NL, is waiting at Avra Valley for FAA approval for a ferry flight to The Netherlands. The flight will be commanded by Frank Lang with stops planned at Kansas City, Goose Bay and Keflavik before arrival at Leylestad, Holland.

Click for large version
Click here for full size photo!

Photo © Ralph M. Pettersen: The "after" photo - what a gorgeous airplane!


View Large View Medium
Click here for bigger photo!

Photo © Ralph M. Pettersen: Sunrise at Avra Valley.
View Large View Medium
Click here for bigger photo!

Photo © Ralph M. Pettersen: On a test flight during May, 2002.


N749NL still waits in Avra Valley for the required FAA ferry permit. The Museum is still optimistic about making the flight to The Netherlands later this summer. Much credit should be given to the Dutch Aviodome Museum and their partners at The Constellation Group in Arizona for saving this grand old lady!

Written by
Ralph Pettersen

Ralph Pettersen, a true lover of old piston engined airliners, has been photographing and writing about them since the mid-1960's. In addition to being a regular contributor to Propliner Magazine, his other passion is flying his 1966 Beechcraft Debonair which he has flow throughout the US. While waiting the win the lottery, he continues to support these passions with his “day job” as an executive for an engineering services company. Editor's note - Ralph is the first non-staff Airliners.Net member to be published twice on this site. If Connies are your thing, please read his other article, regarding the Dutch Aviodome Museum's restoration work on another Constellation.

8 User Comments:
Username: Hoons90 [User Info]
Posted 2002-08-10 00:33:34 and read 32768 times.

Very nice article and very nice photos!

Username: DeltaBoy777 [User Info]
Posted 2002-08-11 06:09:46 and read 32768 times.

Truly a stellar aircraft!! Thank you Ralph for your great article!! May you fly many more dream flights in your years to come!!

~DeltaBoy777~

Username: 9V-SVA [User Info]
Posted 2002-08-11 12:40:46 and read 32768 times.

Very interesting article and very beautiful shots.

9V-SVA

Username: Lai [User Info]
Posted 2002-08-11 15:29:11 and read 32768 times.

You've done it again Ralph!
Congratulations on a great article and thanks for all those wonderful photos.

Kind regards

Nicolai Musante
Copenhagen, Denmark
--------------------------------------------
USA / Canada April 2002
http://www.musante.dk/tour0102

Username: Teahan [User Info]
Posted 2002-08-14 23:02:15 and read 32768 times.

Hello,

Thanks for the interesting article and nice choice of photos!

Jeremiah

Username: E_Cantu [User Info]
Posted 2002-08-22 22:06:37 and read 32768 times.

I remember those Connies flying around when I was living in OSH (way back when...we moved in '93)! I remember I was only 6 or 7 and wondering why they had more than one fin...!!!

Of course things have since changed, I now know the characteristic tail to be an identifying feature of one of the most beautiful aircraft ever built! Cheers to Lockheed for the outstanding aircraft and to Mr. Pettersen for the outstanding article!

-E

Username: Mls515 [User Info]
Posted 2002-08-24 05:01:50 and read 32768 times.



This aircraft, 8609, is sitting at Iowa City Municipal tonight. I think I will head out tomorrow and pay the $95 for a quick ride.



mls515

Username: Turbulence [User Info]
Posted 2002-09-08 23:18:06 and read 32768 times.

This is a supreme for anyone!!!

Thanks for your article, for the pics of such a mighty bird, and your detailed explanation sharing what we all would love to do, with no kind of doubt.

That's a dream!!!!

Best turbulences

Post your comments on this article:
Username: 


No username? Sign up now!
  • Article related posts only. Other topics here.
  • No adverts of any kind. This includes web pages.
  • No hostile language or criticizing of others.
  • Back all your opinions with facts.
  • Do not post copyright protected material
  • Check your spelling!             Detailed Rules...
Password: 


Forgot Password? Be reminded.
Body:

Read how to include links, pictures and smilies! (opens in new window)

Please check your spelling before
pressing the Post button once.

Discuss other aviation issues in our active Discussion forums!

Publish your article on Airliners.net!    
    
Recommend this article
to a friend!
    
    Read more articles!