LAXspotter From India, joined Jan 2007, 3650 posts, RR: 7 Posted (2 years 9 months 3 weeks 2 days 4 hours ago) and read 1917 times:
I recently purchased the Ultimate traffic package and was wondering is there anyway in FS to have two intersecting runways in Use. I was in LGA where there were 20 Aircraft waiting to takeoff runway 22. I was wondering if it was possible to use runway 13 for landings and 4 for takeoff just as it happens in reality. If there is anyway to change this for all airports. Thanks.
BAW076 From United Kingdom (Scotland), joined Aug 2006, 648 posts, RR: 40 Reply 1, posted (2 years 9 months 3 weeks 2 days 2 hours ago) and read 1891 times:
There is, but you need to learn how to use AFCAD and how to activate crosswind runways.
Csturdiv From United States, joined Aug 2005, 935 posts, RR: 4 Reply 2, posted (2 years 9 months 3 weeks 2 days 1 hour ago) and read 1885 times:
The AFCADs in UT are very basic. You can replace them with updated AFCADs off of AVSIM that have multiple runways and assigned parking as well. Just make sure that you do not have any duplicate AFCADs installed, or else you will see some strange things. To check for duplicate AFCADs, use a program called ScanAFD, I think the filename is scanafd.zip on AVSIM.