Elcableguy77 From United States of America, joined Feb 2005, 523 posts, RR: 5 Posted (6 years 4 months 2 weeks 4 days 23 hours ago) and read 7857 times:
While editing the aircraft.cfg file for some of my AI traffic, I was wondering something:
In the parking code section, how is the best way to separate entries, i.e. USAX and AWI? I have been using the form of:
Is that the right syntax?
Also, when editing my AFCAD parking spaces, I use the syntax of:
DAL DALX NWA NWAX
Is this also right?
Former ZW F/A | "Wisconsin 72A, contact departure, see ya."
Csturdiv From Australia, joined Aug 2005, 1503 posts, RR: 3
Reply 1, posted (6 years 4 months 2 weeks 4 days 15 hours ago) and read 7843 times:
The AFCAD portion looks correct, but I've always been under the impression that FS9 only looks at the first entry in atc_parking_codes= and nothing after a , Same thing with the parking type (ramp, gate, cargo and so on). But I could be mistaken on that though.
An American expat from the ORD area living and working in Australia
NorthStarDC4M From Canada, joined Apr 2000, 3056 posts, RR: 36
Reply 3, posted (6 years 4 months 2 weeks 2 days 22 hours ago) and read 7815 times:
AIRLINERS.NET CREW CHAT OPERATOR
its no comma, if you want AWI and USAX i would enter it as: AWI USAX
always put the most specific code 1st. That way if there are available gates coded USAX AWI CHQ and others say USAX PID CHQ, the plane will go to the AWI coded one. If you enter USAX AWI on the plane, it will look for USAX 1st and park at the 1st available USAX coded gate.
Those who would give up Essential Liberty to purchase a little Temporary Safety, deserve neither Liberty nor Safety.