MaverickM11 From United States of America, joined Apr 2000, 18396 posts, RR: 46 Posted (6 years 10 months 3 weeks 3 days 7 hours ago) and read 9903 times:
I've tried to close various runways in FS9 so that AI doesn't land on them and end up causing a traffic jam. For instance, I've closed runways 36L/R at MAD for landing traffic, and left runways 33L/R open for landing...but AI still continues to land on 36L/R as well as takeoff (it should only be takeoff runways). Moreover, the wind was coming from 150 so it should have been landing on 18L/R in the first place! Any ideas how to make sure the runways closed in AFCAD actually are closed? And why does FS select northbound runways for takeoffs/landings when the wind is coming from the South?
N521NA From United States of America, joined Jul 2001, 517 posts, RR: 2
Reply 1, posted (6 years 10 months 3 weeks 3 days 5 hours ago) and read 9894 times:
There's some type of logic that prevents a runway from being closed permanently even if you close it using an AFCAD editor. What might help is removing the ILS from 36L/R which would make it less likely for FS ATC to send AI to those runways.