Sponsor Message:
Aviation Hobby Forum
My Starred Topics | Profile | New Topic | Forum Index | Help | Search 
Misaligned Text On FSX  
User currently offlineKLM672 From United States of America, joined Oct 1999, 2578 posts, RR: 3
Posted (5 years 1 month 1 week 4 days 12 hours ago) and read 18754 times:

Hello. I was wondering if anyone else has this problem and if there are any solutions. It seems that text is misaligned on FSPassengers, Map! (as seen in this screen shot). It also carries through to the panel... look at the 3rd throttle power, the "bolded" white line is misaligned along with the "330" on the far right. I've also noticed this on my Default GPS. How does I set the AA outside of the sim?

And for what it's worth, this did not happen when I had FS9. ! It doesn't matter if I move the boxes, make them bigger or smaller it still looks like the text isn't completely lined up.

Operating System: Windows Vista™ Home Premium (6.0, Build 6002) Service Pack 2 (6002.vistasp2_gdr.100608-0458)
Language: English (Regional Setting: English)
System Manufacturer: Gateway
System Model: FX6800-01e
BIOS: Default System BIOS
Processor: Intel(R) Core(TM) i7 CPU 920 @ 2.67GHz (8 CPUs), ~2.7GHz
Memory: 3062MB RAM
Page File: 2988MB used, 3349MB available
Windows Dir: C:Windows
DirectX Version: DirectX 11
DX Setup Parameters: Not found
DxDiag Version: 7.00.6002.18107 32bit Unicode

Display Devices
Card name: ATI Radeon HD 4850
Manufacturer: ATI Technologies Inc.
Chip type: ATI Radeon Graphics Processor (0x9442)
DAC type: Internal DAC(400MHz)
Device Key: EnumPCIVEN_1002&DEV_9442&SUBSYS_E810174B&REV_00
Display Memory: 2294 MB
Dedicated Memory: 1019 MB
Shared Memory: 1275 MB
Current Mode: 1680 x 1050 (32 bit) (60Hz)
Monitor: Generic PnP Monitor
Driver Name: atidxx32,atidxx64.dll,atiumdag,atiumdva,atiumd64.d ll,atiumd6a.dat,atitmm64.dll
Driver Version: 7.15.0010.0127 (English)
DDI Version: 10.1
BGRA Supported: No

6 replies: All unread, jump to last
User currently offlineFly2HMO From , joined Dec 1969, posts, RR:
Reply 1, posted (5 years 1 month 1 week 1 day 3 hours ago) and read 18639 times:

Looks like texture tearing. First off, you have very old drivers. ATI Catalyst 10.10 drivers should be out by now. UPDATE THEM MONTHLY. This is very important. That may fix that.

Otherwise, sounds like a vertical-sync problem. Open catalyst control center and set Vertical sync to default on.

As for AA. DON'T use the FSX graphics settings for anti-aliasing, change them directly on the ATI Catalyst control center.

User currently offlineKLM672 From United States of America, joined Oct 1999, 2578 posts, RR: 3
Reply 2, posted (5 years 1 day 12 hours ago) and read 18057 times:

I tried everything you said but no luck. I am unable to find the 10.10 drivers. Any other suggestions?

User currently offlineklm672 From United States of America, joined Oct 1999, 2578 posts, RR: 3
Reply 3, posted (2 years 11 months 3 weeks 6 days 6 hours ago) and read 14129 times:

I am still having this issue, When I click "update drivers" it says that everything is up to date..

User currently offlineklm672 From United States of America, joined Oct 1999, 2578 posts, RR: 3
Reply 4, posted (5 months 2 weeks 6 days 15 hours ago) and read 3925 times:

Can anyone provide any guidance on this?

Thank you!

User currently offlineN415XJ From United States of America, joined Aug 2014, 408 posts, RR: 0
Reply 5, posted (5 months 2 weeks 6 days 13 hours ago) and read 3914 times:

Aviation hobby is a relatively small and lightly visited section of the a.net forums, so getting technical help for FSX here is difficult. I'd advise you to go over to avsim.net and make a (free) account on their forums. You'd be able to get some help in about 5 hours instead of 5 years.

User currently offlineklm672 From United States of America, joined Oct 1999, 2578 posts, RR: 3
Reply 6, posted (5 months 2 weeks 5 days 15 hours ago) and read 3864 times:

Thank you  

The message you were about to post is too short and probably not of any higher value to the topic at hand. You should think long and hard before posting a message in this forum and make it detailed and a valuable addition to the topic discussed.
Avoid posting "Me Too" messages. These are messages that are posted by people who agree to a point being discussed and post a one liner, "me too!", "Good post Jim!", "I disagree" or similar message. This takes up time as readers must sort through these messages which have no real value to the group at large. Any message containing nothing more than a line or two of text is probably not worth posting.
If you have an opinion on a topic, you should in detail express why you have the opinion and what made you come to that conclusion.
Your post should be relevant to the topic discussed.

Top Of Page
Forum Index

Reply To This Topic Misaligned Text On FSX
No username? Sign up now!

Forgot Password? Be reminded.
Remember me on this computer (uses cookies)
  • Aviation hobby related posts only.
  • Back all your opinions with facts.
  • No adverts of any kind. This includes web pages.
  • No hostile language or criticizing of others.
  • Do not post copyright protected material.
  • Use relevant and describing topics.
  • Check if your post already been discussed.
  • Check your spelling!
Add Images Add SmiliesPosting Help

Please check your spelling (press "Check Spelling" above)

Similar topics:More similar topics...
Technic Problems On FSX posted Sun Aug 9 2009 11:34:14 by LY777
Need Help W/ Special Effects On FSX posted Sat Jun 27 2009 09:34:18 by B727fan
Falcon 900 Speed Drops (on FSX) posted Sun Jun 8 2008 11:53:21 by Wardialer
Getting Posky Models To Work On FSX posted Fri May 9 2008 15:27:45 by TrijetFan1
Update On FSX Downloads posted Mon Dec 10 2007 21:52:21 by Jkj777
A321 On FSX posted Tue Sep 25 2007 18:05:38 by Adman737
Playing Atc On Fsx? posted Fri Aug 17 2007 01:33:14 by JamesJimlb
Problems With 787 Add On FSX! posted Wed Aug 15 2007 21:26:01 by LY777
Jetbridg Extending With Downloaded Aircraft On FSX posted Tue Jul 17 2007 05:18:07 by TWA1985
Please, How To Activat The Thrust Reverser On FSX? posted Wed Jun 20 2007 17:58:57 by LY777

Sponsor Message:
Printer friendly format