Spark From United States of America, joined Mar 2002, 431 posts, RR: 0 Posted (10 years 4 weeks 11 hours ago) and read 2431 times:
I want to learn how to set up multiple runways when working AFCAD at various airports.
It seems that Closing the longest runway means that only landings are allowed. Is this correct?
Also, is it possible to allow an approach from only one direction on a runway?
The big reason that I'm confused is that I set up my JFK so that landings occur on 31L, and take offs are on either 31R/13L, or 22R/4L. However, the first time I tried this planes were landing on 31L and taking off on 13L. This doesn't seem to be possible in a real world situation.
BTW, the wind direction was 60.
N139j From United States of America, joined Nov 1999, 380 posts, RR: 1 Reply 1, posted (10 years 4 weeks 11 hours ago) and read 2406 times:
From what I read above you need to open other rwys for landing. If the only one you have open is 31L, they have to land there regardless of winds and departing aircraft. If you open up 13L for landing, I would assume the problem will be gone.
Sponsor Message: 
From United States of America, joined Mar 2002, 431 posts, 
From United Kingdom, joined Nov 2001, 3432 posts, 
Sponsor Message: 
Printer friendly format
