StarFlyer From Germany, joined Sep 2002, 987 posts, RR: 1 Posted (9 years 10 months 1 week 6 days 18 hours ago) and read 15893 times:
I have a pretty extensive collection of Project AI add on airlines. Thing is, most of the time they dont show up because their position is taken up by one of those annoying Pacifica, Soar or Orbit flights. I have tried the Project AI remove package but it doesnt work for me - I have run it at least 10 times to no avail.
I run Win XP, FS9 on a Centrino 1,4Ghz laptop with 512MB RAM.
Bernard Shakey From United States of America, joined Oct 2001, 560 posts, RR: 10 Reply 2, posted (9 years 10 months 1 week 5 days 19 hours ago) and read 15832 times:
What I did was replace the defaults with add-ons using TTools. Since Southwest 737s, Northwest DC9s, etc. are very common in the US, I just replaced the default 737s/M80s with add-ons such as these. The drawback is flying globally, as you wouldn't run into American M80s in places such as Tahiti. What you can do then is use the CTRL F feature and scan your flight plans (searching for each aircraft number) and use more regionally appropriate aircraft on specific flights. Takes some time, but my AI has come together nicely. I should have it running perfectly by the time FS10 comes out and I have to start all over again.
Mindless drifter on the road, Carries such an easy load
StarFlyer From Germany, joined Sep 2002, 987 posts, RR: 1 Reply 3, posted (9 years 10 months 1 week 5 days 17 hours ago) and read 15829 times:
so if you delete them out of the aircraft folder, do you still hear them on ATC? Btw do you guys get the message "you are 300 above/below your assigned altitude" for AI traffic a lot? I got really annoyed by that.
I did a complete reinstall yesterday, used the Project AI default traffic remover today but those buggers are still flying around in my sky.
@Bernard Shakey, I heard you can remove default traffic altogether using TTools. Unfortunately I am not too familiar with the program, is it hard to use?
StarFlyer From Germany, joined Sep 2002, 987 posts, RR: 1 Reply 5, posted (9 years 10 months 1 week 5 days 16 hours ago) and read 15818 times:
I was doing a flight from Frankfurt to Dubai and a Lufthansa flight to Oman was trailing me on the same airways and every 5 minutes it was too high or too low. Not very good pilots those AI folks are they?!
ARCJET From , joined Dec 1969, posts, RR: Reply 10, posted (9 years 10 months 1 week 3 days 9 hours ago) and read 15772 times:
1. Using TTools, copy your flightplans030528 to another location on your computer should you want to use it later.
2. In TTools, delete the flightplans030528
3. Using Windows Explorer go to: Microsoft Games/FS9/World/scenery
4. Open the scenery folder, go to the bottom and Delete the traffic030528.bgl
5. Go back to TTools and do a COMPILE
6. This will remove the default flight plans from FS9
Continental From United States of America, joined Jun 2000, 5484 posts, RR: 20 Reply 11, posted (9 years 10 months 1 week 3 days 6 hours ago) and read 15810 times:
That's what I did. After that I lost all including the general aviation. I wanted the GA back, so I went to projectai.com, and they have a download for the GA aircraft. Now I'm have opposing thoughts, especially when a Cessna somehow gets in front of me on final!!