Throttle Problem In FS2K4 — Aviation Hobby Forum

Sponsor Message:


My Starred Topics \| Profile \| New Topic \| Forum Index \| Help \| Search

Throttle Problem In FS2K4

Crank From Canada, joined exactly 12 years ago today! , 1556 posts, RR: 3
Posted (9 years 3 months 1 week 6 hours ago) and read 2491 times:

This happens to me all the time in FS, all of a sudden the throttle on my joystick controls only the #1 engine instead of all engines, the thrust will be set correctly on this engine and the other engines will remain at idle. The only way to solve this problem right now is to re-select the aircraft in the menu. Is there an easier way?

Thanks

4 replies: All unread, jump to last

Fly2hmo From , joined Dec 1969, posts, RR:
Reply 1, posted (9 years 3 months 1 week 4 hours ago) and read 2445 times:

don't click the throttles with the mouse 'cause it sometimes selects a specific throttle, making every other command for the throttle obey only that one.

Skytrain From Canada, joined Jan 2004, 297 posts, RR: 7
Reply 2, posted (9 years 3 months 1 week 3 hours ago) and read 2438 times:

Also, if you happen to be stuck controlling only one engine, push 'e' and then '1,2,3,4' in quick succession. This command should re-select all engines! This should prevent you from having to re-select the aircraft from the a/c selection menu.

Hope this Helps! Big thumbs up

Cheers - Skytrain.

At the end of the day we are likely to be punished for our kindnesses...

Crank From Canada, joined exactly 12 years ago today! , 1556 posts, RR: 3
Reply 3, posted (9 years 3 months 6 days 23 hours ago) and read 2417 times:

Thanks, I'll try that the next time I encounter this problem.

Crank From Canada, joined exactly 12 years ago today! , 1556 posts, RR: 3
Reply 4, posted (9 years 3 months 2 days 7 hours ago) and read 2359 times:

Well, I just had the problem again after starting up a MD11, I pressed E and 1,2,3 and all engines were under control.

Thanks!