Jgore From Argentina, joined Feb 2002, 550 posts, RR: 2 Posted (11 years 11 months 3 weeks 2 days 15 hours ago) and read 11516 times:
Every time I'm cleared for ils, I have to pause the game, click on world -> map, locate the airport, double click on it, and scroll down to the runways information and get the ils freq and approach course.
Is there any other way to figure this out without pausing the game and keep flying ?. It's really annoying, it makes my flight unrealistic.
FlyingColours From United Kingdom, joined Dec 2003, 2352 posts, RR: 9
Reply 2, posted (11 years 11 months 3 weeks 2 days 15 hours ago) and read 11493 times:
Do what I do, when filing the flight plan bring up the airport information from the map, write all of the ILS frequencies down on a small piece of paper (I use Post-It thingies) and then keep it by your monitor (If you have a kneeboard use that). It is also handy because you'll still have it for future flights (unless you throw it away afterwards)
Lifes a train racing towards you, now you can either run away or grab a chair & a beer and watch it come - Phil
ZKSUJ From New Zealand, joined May 2004, 7232 posts, RR: 11
Reply 9, posted (11 years 11 months 3 weeks 1 day 20 hours ago) and read 11459 times:
I usually get all the information I need befor the flight at the planning stage, I get the frequencies, elevation, headings etc... for all the runways at my destination. Then I don't have to pause anything.