CanadianNorth From Canada, joined Aug 2002, 3377 posts, RR: 9 Reply 2, posted (9 years 3 months 3 weeks 3 days 11 hours ago) and read 3774 times:
If yer talking about doors on the aircrafts I know the main door can be opened via pressing Shift+E, but I heard that on some aircrafts you can open several doors, something that I have yet to figure out.
LHR27C From United Kingdom, joined Aug 2004, 1279 posts, RR: 17 Reply 6, posted (9 years 3 months 3 weeks 3 days ago) and read 3746 times:
You can also try Shift+F and Shift+T for, strictly speaking, tailhook and wingfold although they are sometimes assigned to doors. It should say in the aircraft's readme what shortcuts are available and what they do.
Once you have tasted flight, you will walk the earth with your eyes turned forever skyward
Santhosh From India, joined Sep 2001, 542 posts, RR: 1 Reply 7, posted (9 years 3 months 3 weeks 2 days 21 hours ago) and read 3735 times:
The most generally used keys by designers are already mensioned above.Recently I downloaded an Sabena A319 aircraft from avsim it uses keys as follows
1) Shift E+1- To open the main exit
2) Shift E+2- To open all other 3 doors in the aircraft
3) Shift T - To open both the cargo doors
4) Shift W - To open the aircondetioning vents
4) Shift F - To drop the controls surfaces when aircraft is parked.
Sometimes different designers assign different keys for different features but this is for your general information.Hope it helps
Santhosh From India, joined Sep 2001, 542 posts, RR: 1 Reply 9, posted (9 years 3 months 3 weeks 2 days 21 hours ago) and read 3726 times:
Sir I was trying to figure out the problem.Well are you sure that the aircraft the you use has opening doors?If yes then may be the designer might have used some other combination of keys.They reading the readme files if at all the aircraft has any.
Or sometimes it happens with me,when I try to open the other doors than the main exit,it sometimes doesn't happen at all. In that case I just reset the aircraft and then everything functions normally.Hope this helps you