Ngr From United States of America, joined Apr 2001, 176 posts, RR: 0 Posted (9 years 7 months 2 weeks 6 days 16 hours ago) and read 4627 times:
I just bought Ultimate Traffic, and I love it, but I am getting problems when I fly into busy airports. For example, at ATL, after I land (on an outer runway) there are about 10 planes lined up that need to cross the inner runway to taxi to the various concourses, but ATC will not clear them to cross due to departing aircraft. The only way I can cross is by "Illegally" crossing and taxiing on the wrong taxiways. Is there any solution to this?
N754AN From , joined Dec 1969, posts, RR:
Reply 2, posted (9 years 7 months 2 weeks 6 days 16 hours ago) and read 4616 times:
There are 2 ways of doing this AFAIK.
1. (The easy option) - Turn your traffic density down to about 80% when at busy airports. I have to do this.
2. (The harder option) - You can edit the AFCAD for ATL and change taxiways in use, or reassign certain runways for departure/arrival only... but this I only recommend if you are experienced in using AFCAD.