Cre From United States of America, joined Jun 2000, 187 posts, RR: 0 Posted (7 years 12 months 4 days 6 hours ago) and read 3442 times:
With my FS2004 I was trying to set the spot plane for an altitude of 50 feet. It does that, but when I rotate to a different angle it automatically goes back to the default setting of zero altitude.
Is there a way to set the altitude view of the spot plane at a desired foot level and keep it there when rotating at different views?
David L From United Kingdom, joined May 1999, 9210 posts, RR: 42 Reply 1, posted (7 years 12 months 3 days 22 hours ago) and read 3416 times:
How are you changing the angle? If you use the numeric keypad to move to specific angles (e.g. head-on, left side, etc.), the view will switch to the same level as the aircraft. If you use the hat switch or left/right/up/down cursor keys, the view should rotate smoothly in the chosen direction.
Sponsor Message: 
From United States of America, joined Jun 2000, 187 posts, 
From United Kingdom, joined May 1999, 9210 posts, 
Sponsor Message: 
Printer friendly format
