Phatfarmlines From United States of America, joined Sep 2001, 1431 posts, RR: 1 Posted (10 years 3 months 2 weeks 4 days 19 hours ago) and read 10908 times:
I seem to have forgotten the command to open up the POSKY A330 cargo doors. I know it exists because you can see the gMax cutout of the cargo doors. It isn't Shift+E2, Ctrl+I, and Shift+T since I tried those. I also tried to open them using the "Water Rudder" command but to no avail. If anyone here knows the command please post it, thanks.
Jeffry747 From United States of America, joined Jun 2005, 968 posts, RR: 2
Reply 3, posted (10 years 3 months 2 weeks 2 days 17 hours ago) and read 10829 times:
I couldn't figure out myself what was the command for opening doors and such so I assigned my own key command for it: Shift+D. And when I tried it on the POSKY KLM A330, all it did was open the passenger doors on the right side of the aircraft.
Phatfarmlines From United States of America, joined Sep 2001, 1431 posts, RR: 1
Reply 5, posted (10 years 3 months 2 weeks 1 day 5 hours ago) and read 10795 times:
After unassigning and reassigning the keys multiple times with no success, I decided to check in the aircraft.cfg file to see what settings the tailhook/wingfold/exits were configured to. I discovered that the [exits] configuration was not even present in the aircraft.cfg file, for some mysterious reason. I then downloaded a base POSKY 330V2, and copied the [exits] configuration to the problem A330. The cargo doors now open with the "Shift+E2", in addition, the main door now opens with "Shift+E" which I also discovered was not opening.
Moral of the story: Check the aircraft.cfg file to verify the tailhook/wingfold/exits configuration are present and accurately configured. Without them, anyone attempting to assign keys to open doors without these configurations in place will discover that the commands will not work.