Arniepie From Belgium, joined Aug 2005, 1292 posts, RR: 1
Reply 3, posted (9 years 4 months 2 weeks 18 hours ago) and read 13533 times:
Check that the fuel valves are open on the pedestal, on the overhead panel open the fuel valves and don't forget to switch on the electrics.
When starting up put the valves on the ped. in the first position up and when the engine reaches the necessary level(EGT I believe) than put the valves fully up.
READ THE MANUAL for finding out the correct values!!!
Chey2748 From Bahamas, joined Apr 2009, 2 posts, RR: 0
Reply 4, posted (6 years 9 months 3 weeks 5 days 3 hours ago) and read 10979 times:
I have been experiecing the same problems with this panel. Every time the engine 2 is started, with the strobelights on, the panel starts flickering, shortly after, flight sim just crashes! I have no explaination, I have tried all the fixes, except for the reconfiguration in the fs9.config file, not the main Flight Sim file, I can't find this file. I also have the Virtualcol Fokker 50, and genrally experience simular issues with not being able to change radio frequencies, autopilot not being able to activate it, etc.
Has anyone identified the cause and has anyone come up with a fix for this program, or does anyone know of another Fokker 50 panel?