N766AS From , joined Dec 1969, posts, RR: Reply 1, posted (12 years 1 month 3 weeks 3 days 8 hours ago) and read 2849 times:
BC stands for backcourse and is used on published BC approaches. Can't get into the specifics right now (no time), but (say theres rwys 16 and 34) basically a backcourse for rwy 16 uses the rwy 34 localizer and instead of chasing the needle, you fly away from the needle.
Hopefully someone else can get into more detail....
Sushka From United States of America, joined Nov 1999, 4784 posts, RR: 16 Reply 2, posted (12 years 1 month 3 weeks 3 days 8 hours ago) and read 2842 times:
Ok, I think im getting it now. Do all ILS runways do this? Im going to try it today and see what happens.
thankyou
N766AS From , joined Dec 1969, posts, RR: Reply 3, posted (12 years 1 month 3 weeks 2 days 14 hours ago) and read 2825 times:
Not all... in FS, if there is an ILS, then it usually covers two runways (16L and 34R for example). If there is an ILS or LOC that ONLY is listed for one runway, then you can use the BC for the opposite runway. In real-life, this is only allowed if the back course is FAA approved.
Baec777 From United States of America, joined Oct 1999, 1231 posts, RR: 2 Reply 4, posted (12 years 1 month 3 weeks 1 day 12 hours ago) and read 2804 times: