Vafi88 From United States of America, joined Apr 2001, 3116 posts, RR: 19 Posted (9 years 3 months 3 weeks 3 days 6 hours ago) and read 2118 times:
Hey guys, I don't know what's up, I really didn't want this to resort to my own post, but I guess I'll have to do it... This was rejected for bad motive 2 times (They said I didn't change it the second time eventhough I reworked from start to finish) and then rejected by the admin for the SAME THING - I want to know what's wrong with this picture, not a generic responce...
JeffM From United States of America, joined May 2005, 3266 posts, RR: 53 Reply 1, posted (9 years 3 months 3 weeks 3 days 5 hours ago) and read 2104 times:
Vitaly,
As you know, badmotive refers to "What are we looking at here" impression of your photo. I found myself bouncing between the two aircraft, not sure which was the one you wanted me to see.
Half of the Antonov, and the LH just disappearing.... I would have liked a tighter shot of the Antonov, or back out the zoom and get the whole thing. Ideally, being able to actually see the touch down point of the LH would have been nice.
Vafi88 From United States of America, joined Apr 2001, 3116 posts, RR: 19 Reply 2, posted (9 years 3 months 3 weeks 3 days 5 hours ago) and read 2093 times:
Jeff - do you think if I zoom in a bit and cut off a protion of the LH to make my point clear I could get it in?? Or would it still not be good enough?
Thanks (BTW - focal blade program is fantastic, thanks!)
Vitaly
I'd like to elect a president that has a Higher IQ than a retarted ant.
JeffM From United States of America, joined May 2005, 3266 posts, RR: 53 Reply 3, posted (9 years 3 months 3 weeks 3 days 2 hours ago) and read 2060 times:
Hmmm.. not sure, but you can always try it.
glad you like it...
DLKAPA From , joined Dec 1969, posts, RR: Reply 4, posted (9 years 3 months 3 weeks 3 days 2 hours ago) and read 2057 times:
I have had problems with zooming in, Vitaly, the image tends to become very grainy. I have had many a photo rejected for that reason, and you can see why in my section in MyAv.net