Nucsh From United States of America, joined Apr 2004, 238 posts, RR: 0 Posted (10 years 11 months 4 weeks 1 day 12 hours ago) and read 2928 times:
Hi everyone, I'm new to a.net and was wondering, for all of those CLT enthusiasts, where are some good photo opp spots? I've traveled down to the airport a bit, but I havn't been back in a while, actually, it's been about a year. I'd also like to know what the security issues are down there as well. Thanks for everything in advance, and I hope to be talking to you all on the forums soon.
-Chris // A.k.a. Nucsh
If landing is about "kissing" the ground, you just about raped it.
Go3Team From United States of America, joined Mar 2004, 3268 posts, RR: 15
Reply 1, posted (10 years 11 months 4 weeks 1 day 11 hours ago) and read 2902 times:
Welcome to a.net! When I was younger, abt 15-20 years ago, I used to spend a lot of time at CLT. This was back when you could get thru security with out a boarding pass. Although I haven't been back there in abt 10 years, I pass by it from time to time, and this evening I will also. There seems to be a lot of traffic these days. The only place I can remember getting close, is the air cargo area off of Billy Graham somewhere. I am sure someone else can probably help you out more.
Jderden777 From United States of America, joined Jan 2000, 1760 posts, RR: 27
Reply 2, posted (10 years 11 months 4 weeks 1 day 11 hours ago) and read 2904 times:
i'm sure some of the locals can help you out more than i can...but there are a few places i can recommend:
the overlook near the threshold of runway 18R...gives you a great view and is open all day...the fence is down low too so you don't have to worry about getting the fence in the shots...(best for afternoons)
also, the north carolina air museum on the northeast side of the field (near 18L) offers some good views as well (best for mornings)...$3 gets you in the museum and there's a viewing deck they built up there so you can see over the fence...
there's more spots but i don't think you can stop there anymore...