Tsentsan From Singapore, joined Jan 2002, 2016 posts, RR: 15 Posted (10 years 10 months 3 weeks 5 days 13 hours ago) and read 4042 times:
I photographed this aircraft this morning, and well, looking back now it doesnt look as good as it should have been. Does anybody know any good ways that I could improve this shot (technic wise preferred). I dont think it is good enough for Airliners.net so I wont try to clog the queue with it.
Would appreciate any comments that anybody would have too
IL76 From Netherlands, joined Jan 2004, 2239 posts, RR: 46
Reply 1, posted (10 years 10 months 3 weeks 5 days 13 hours ago) and read 4011 times:
Perhaps you could try just a little longer exposure? And I see some jaggies from sharpening.
Just curious: Was it shot through glass and was it raining? The glare of the lightingpost looks a bit funny (falling raindrops?) and I see blue spots on the tarmac that look like window reflections... But that's pretty minor stuff.
All in all, nice picture though!
N949WP From Hong Kong, joined Feb 2000, 1437 posts, RR: 1
Reply 2, posted (10 years 10 months 3 weeks 5 days 12 hours ago) and read 4008 times:
Suggest that you keep those floodlights that are shining in your direction out of the shot, as they are creating quite a distracting glare to the photo. With that done, you may need to over-expose the shot a fair bit to capture sufficient details, as that 330 seems to be backlit to begin with.
Not sure how practical it is for your situation, but I'd try to find subjects that are "properly" lit by the ramp floodlights. Makes night photography much easier!!
Tsentsan From Singapore, joined Jan 2002, 2016 posts, RR: 15
Reply 4, posted (10 years 10 months 3 weeks 5 days 4 hours ago) and read 3906 times:
Thanks for the input, I shot that through glass and after a thunderstorm. The blue dots in the sky I think are a Nikon sensor problem, definately not stars. Perhaps I could rework those exposures since its all on RAW, but doesnt seem to be able to convey the right atmosphere. Specs wise, F/10 30 sec 102mm.