Blackened From , joined Dec 1969, posts, RR:
Reply 2, posted (14 years 1 month 1 week 15 hours ago) and read 2020 times:
Yes, that works to some point but you can't see the whole slide "flat" and undistorted, can you? There is just one spot where you point the mag. glass at where it's sharp and clearly visible. That's not a good solution.
Cfalk From , joined Dec 1969, posts, RR:
Reply 3, posted (14 years 1 month 1 week 14 hours ago) and read 2018 times:
I have 3 different loupes. Two of them are cheap ones, and as you said, you can only see a part of the slide clearly, and there is a lot of distortion. My third loupe is a more expensive Nikon loupe (I paid about $50 for it), Where you can see the whole slide, with no distortion, and the magnafication effect is basically as if you had an IMAX theater in your hand.
YHU From Canada, joined Jun 2000, 434 posts, RR: 1
Reply 4, posted (14 years 1 month 1 week 13 hours ago) and read 2009 times:
I have a hand heald slide viewer. There is a light in the back and you slide the slide in front of it. It is magnified as well. So it's just like looking at a very clear print. It makes using slides a lot more satisfying, because you can just quickly go through them looking at your shots without having to either scan them in, use a projector or just hold them up to the light. The make of this one is an Agusta. I believe Kodak may make a small one, but with no maginification.