AA 777 From United States of America, joined May 2002, 808 posts, RR: 12 Posted (10 years 3 months 3 weeks 3 days 19 hours ago) and read 3569 times:
I Just got the following 6 pictures rejcted for badborders but I cant see anything wrong the borders. I have asked a few people already and they werent able to see anything wrong. Maybe someone here does. Any help is appreciated!
US333 From United States of America, joined Sep 2004, 121 posts, RR: 0
Reply 1, posted (10 years 3 months 3 weeks 3 days 19 hours ago) and read 3558 times:
Yeah it's hard to see, but if you zoom in really close to a corner and then scroll around the edge of the image you'll notice there is almost a box that is slighty off-color encomposing the whole shot. I used to get this sometimes until I started using the crop tool in photoshop. Just crop them with the crop tool and you should be alright.
Willo From United Kingdom, joined Dec 2003, 1352 posts, RR: 11
Reply 5, posted (10 years 3 months 3 weeks 3 days 15 hours ago) and read 3510 times:
Quoting Tin67 (Reply 4): I'm not doing anything different in PS
As I said in the other thread about this subject, I am in the same boat, albeit on only a couple of shots and not on everyone that I have processed. I am doing nothing differently with these to what I have done on the other 200+ shots that have been accepted. I wondered if this problem maybe connected with auto-updates that occur with PS (I have Elements). Could there have been a dodgy download recently, because does seem odd that there has suddenly been a spate of these rejections?
This thread has a useful tip about canvas size that I will try when I have a go at the reworks
Tin67 From United Kingdom, joined May 2004, 268 posts, RR: 3
Reply 6, posted (10 years 3 months 3 weeks 3 days 6 hours ago) and read 3488 times:
Quoting Willo (Reply 5): This thread has a useful tip about canvas size that I will try when I have a go at the reworks
Thanks Willo, I have tried the canvas reduction and now that I have calmed down I will resubmit the photos.
I don't know whether this has anything to do with it, but in PS Help I found this section.
You can use commands in the Select menu to increase or decrease the pixels in an existing selection and to clean up stray pixels left inside or outside a color-based selection.
To expand or contract a selection by a specific number of pixels:
Choose Select > Modify > Expand or Contract.
For Expand By or Contract By, enter a pixel value between 1 and 100, and click OK.
The border is increased or decreased by the specified number of pixels. Any portion of the selection border running along the canvas's edge is unaffected.
To frame an existing selection with a new selection:
Use a selection tool to make a selection.
Choose Select > Modify > Border.
Enter a value between 1 and 200 pixels for the border width of the new selection, and click OK.