UA777222 From United States of America, joined exactly 11 years ago today! , 3348 posts, RR: 11 Posted (9 years 6 months 2 weeks 3 days ago) and read 3804 times:
Oh boy does this suck! I lost all the originals on the Microdrive that was also new and also crashed on me! Argggggggggggg @#@#$!@#$@!#$!@#$!@#$!@#$!@#$!@#$!@#$!@$@!#!@#$!@# nothing towards the members/crew. Just a shit week!
If you could please help me locate the dust spots I would much appreciate it!
Mikec From United Kingdom, joined Feb 2004, 247 posts, RR: 13
Reply 3, posted (9 years 6 months 2 weeks 2 days 23 hours ago) and read 3790 times:
Lovely shots Matt. I see the same dust spot in about the same place on all of them. On the NCA 747, go upwards from the exhaust on the number 2 engine and you'll hit it. It's in roughly the same place on them all.
APFPilot1985 From , joined Dec 1969, posts, RR:
Reply 6, posted (9 years 6 months 2 weeks 2 days 23 hours ago) and read 3763 times:
Welcome to the world of factory dust on the 20D. Mine was loaded with it too, and I dont think that ive yet to sell one that didnt have some as well. Before you try pecpads you may want to try a blower, sometimes it can get the job done and its not as nerve racking.
Gary2880 From , joined Dec 1969, posts, RR:
Reply 8, posted (9 years 6 months 2 weeks 2 days 13 hours ago) and read 3605 times:
yeah same my 20D had about 22 dust spots i think it was right out of the box. sent it back and got a new one due to advice that there were too many to fix. replacement had about 6 or something i think but the specgrabber delt with them. sucked to see all the dust in a new camera
ChrisM001 From United Kingdom, joined Jan 2005, 72 posts, RR: 4
Reply 12, posted (9 years 6 months 2 weeks 2 days 8 hours ago) and read 3510 times:
A good check is to go image-adjustments-equalize to see where all the dust spots are.....I've cleaned my sensor a couple of times but unless you never change the lenses, then sensor dust is a curse we all have to put up with!!
As the first part of my workflow, I now create a new layer from the original, equalize the copied layer and then I can get rid of the spots on the original layer with the clone tool or healing tool. Once they are removed, click on the copied layer and delete it.
UnattendedBag From United States of America, joined Oct 2003, 2342 posts, RR: 1
Reply 15, posted (9 years 6 months 2 weeks 2 days 5 hours ago) and read 3435 times:
Quoting ChrisM001 (Reply 12): then sensor dust is a curse we all have to put up with!!
Yeah, but from the factory? Would you buy a new car with a few coffee stains on the front seat. I think the general gripe is that a $1600 camera should not "include" dust on the sensor. True, you can clean it, but if there is going to be coffee spilled on my car seat or dust on my sensor, I should be the one to put it there, not the factory worker.
And to see some of the dust spots that are on the shipped cameras, makes me think they were assembled outside in the Sahara desert during a dust storm. I have seen 3-6 months (average use) worth of dust in some cases. It is a bit extreme.
JeffM From United States of America, joined May 2005, 3266 posts, RR: 51
Reply 16, posted (9 years 6 months 2 weeks 2 days 5 hours ago) and read 3418 times:
Quoting UnattendedBag (Reply 15): I think the general gripe is that a $1600 camera should not "include" dust on the sensor.
If you took off the body cap to put your lens on, you could have been the culprit. It's only dust, blow it off. If you look over the new car in the showroom and see the coffee stain, do you say something? Or just complain about it when you get home?