Kyle From United States of America, joined Nov 2009, 0 posts, RR: 0
Reply 1, posted
Fri Aug 11 2000 14:27:26 UTC (14 years 8 months 2 weeks 1 day 14 hours ago) and read 931 times:
Scanners always work better with glossy photos, also, check the colour output to Best Colour Photo, If you enlarge it, the program should automatically increase the dpi level. Otherwise, you could try getting a new scanner!!
(I have one Myself)
Granite From UK - Scotland, joined May 1999, 5603 posts, RR: 62
Reply 2, posted
Fri Aug 11 2000 16:41:49 UTC (14 years 8 months 2 weeks 1 day 12 hours ago) and read 929 times:
Also, make sure your monitor is using 32 bit colour.
I have seen myself trying to get a good scan but cannot, only to realise that my monitor is still in 16bit, which I use for FS98!!
USAir_757 From United States of America, joined Jun 2000, 996 posts, RR: 8
Reply 3, posted
Fri Aug 11 2000 21:22:36 UTC (14 years 8 months 2 weeks 1 day 7 hours ago) and read 949 times:
I just got the 3200C and have already played about with the settings.
Use 300dpi and select 'Take extra time to rescan with higher values'.
That should get you going on the 'good landing gear'.
Then use an image editing program such as Paint Shop Pro or the program that comes with your scanner, to sharpen and adjust contrast brightness saturation etc.
-Cullen Wassell @ MLI | Pentax K5 + DA18-55WR + Sigma 70-300 DL Macro Super
Endofdays From , joined Dec 1969, posts, RR:
Reply 4, posted
Fri Aug 11 2000 22:06:01 UTC (14 years 8 months 2 weeks 1 day 7 hours ago) and read 918 times:
Thank You for all the suggestions!