A388 From Netherlands Antilles, joined May 2001, 10790 posts, RR: 15 Posted (10 years 11 months 6 days 11 hours ago) and read 4118 times:
I need some help on this. I uploaded a photo of a TNT A300F taken at Schiphol Rijk. This photo was rejected because of a dirty camera/dirty scanner. As this photo is a digital photo I assume the screener meant that there are some dirt spots on the photo, but I can't find any dirt on the photo. Below you can see my photo:
FlyingZacko From Germany, joined exactly 11 years ago today! , 583 posts, RR: 5
Reply 1, posted (10 years 11 months 6 days 10 hours ago) and read 4069 times:
Above the front part of the fuselage there are several spots. Try to do this: Open it in Photoshop, add a new adjustment layer for brightness and contrast and then tune the brightness down and the contrast up, and you'll see them. Then you can clone them out with the clone stamp, and then get rid of the adjustment layer again. Also try checkin Eric's or Fergul's workflow for that procedure.
Canon 40D + 24-70 f/2.8 L + 70-200 f/4 L + Speedlite 430EX