LeanOfPeak From United States of America, joined Oct 2004, 509 posts, RR: 1
Reply 4, posted (9 years 1 month 2 weeks 3 days 13 hours ago) and read 2428 times:
There is a light border all the way around it. I'm not a screener, but the line is there on the bottom, both sides, and the top. It should be visible if you make a new canvas a few hundred pixels bigger than the image in both height and width with a black or dark blue background (Screeners view images on blue) and paste the photo over the top. It'll also help to zoom in on it, but, at least on some monitors, it is not necessary to do so. It is definitely there.
WhyWhyZed From Canada, joined Jan 2005, 914 posts, RR: 16
Reply 5, posted (9 years 1 month 2 weeks 3 days 13 hours ago) and read 2425 times:
Quoting An-225 (Reply 2): I still don't see the line. Screeners? Please share your input. To me, it appears that this picture was rejected by mistake. Should I appeal?
It's a very faint white line about 1 or 2 pixels in width that goes around the WHOLE photo (See Sample)
It's a bit hard to see, but it's noticeable when you look at the copyright bar. If the screeners are referring to this, they really do have one hell of an eye sight! But I might be wrong, they may be referring to something else.
IL76 From Netherlands, joined Jan 2004, 2237 posts, RR: 48
Reply 7, posted (9 years 1 month 2 weeks 3 days 11 hours ago) and read 2395 times:
I didn't screen this shot, but it's not level either. Needs CW rotation. Lightpost are no dependible reference at AMS. The buildings are.
As for the border... We screen on a dark background, so the borders are much better visible than on the white rejection link.
Hope this helps,
Willo From United Kingdom, joined Dec 2003, 1352 posts, RR: 12
Reply 9, posted (9 years 1 month 2 weeks 3 days 10 hours ago) and read 2371 times:
That is a very useful tip. I had a string of bad borders a while ago and had included an element to my workflow to check for borders. I will give your method a go as it sounds an easy measure to take to try eliminate the problem.
Scbriml From United Kingdom, joined Jul 2003, 12499 posts, RR: 46
Reply 13, posted (9 years 1 month 2 weeks 3 days 7 hours ago) and read 2319 times:
This isn't the case for me, and I suspect a lot of the others who are complaining that we're not receiving rejection emails. I pay for the enhanced Hotmail service, so I have 2Gb of mailbox, of which I'm using about 5%.
As I have said, I receive acceptance emails and the general a.net email correspondance, but I haven't received a rejection email for some time (sadly, this isn't because I haven't had any rejections!)
All I'm asking is for someone to look at the issue. I'm not the only one asking.
Is there a way you can send me a test rejection message?