ANITIX87 From United States of America, joined Mar 2005, 3316 posts, RR: 13 Posted (9 years 6 months 1 week 2 days 15 hours ago) and read 2582 times:
Hi guys. I have finally been able to get some pictures accepted, and even though the screeners always give good reasons for rejections, I am surprised at one of the photos I got accepted. I didn't think it was that good, haha. Why did this one get accepted...
P.S. Paul, if you're reading this, my first comment had nothing to do with you. It was a tough picture to edit and you did a phenomenal job, but part of the horizontal stabilizer is missing and the lighting it very bad, in my amateur opinion. Haha.
www.stellaryear.com: Canon EOS 50D, Canon EOS 5DMkII, Sigma 50mm 1.4, Canon 24-70 2.8L II, Canon 100mm 2.8L, Canon 100-4
UA777222 From United States of America, joined Dec 2003, 3348 posts, RR: 11
Reply 1, posted (9 years 6 months 1 week 2 days 14 hours ago) and read 2552 times:
I wouldn't question accepted photos as they can be taken down faster than they can be put up. If you really think it isn't of a.net quality then pop a note off to email@example.com and I'm sure they'd have no problems pull it down from the database.
IMO it's a good shot. Quality is fair, no badmotiv, centered, etc.
The second shot was probably rejected for badquality. Why? Well because it's bad quality. And 1600px wide just opens the doors for the quality to fall. Wouldn't even try with that one. If the shot(s) that are in the database are poor, to you, then I'm not even going to comment on that second shot.
Sorry to be harsh but posts like these are pointless...
Edoca From Belgium, joined Mar 2005, 688 posts, RR: 9
Reply 3, posted (9 years 6 months 1 week 2 days 14 hours ago) and read 2546 times:
How very inspiring to see a complaint about picture acceptance! Well Antonis, maybe you can try the "upload improved version" feature now!
For the second pic, I would start by recentering, removing noise and sharpening a little.
Edit: and I forgot indeed to mention that it needs to be resized. After all that you can judge if it can make it... Let me know if I can help.