ElpinDAB From United States of America, joined Apr 2005, 489 posts, RR: 3 Posted (9 years 11 months 2 weeks 13 hours ago) and read 3055 times:
I just took this shot earlier tonight and was wondering if I should keep it in the queue or delete it. I was forced to use the highest ISO setting, so it is a little grainy, but I did the best I could to remove some of it using the version of photoshop I have.
ElpinDAB From United States of America, joined Apr 2005, 489 posts, RR: 3
Reply 3, posted (9 years 11 months 1 week 6 days 22 hours ago) and read 2939 times:
It's being deleted from the queue.
Quoting Atomother (Reply 2): I think if you turn the MFD and PFD down to the lowest setting using the softkey you can use a longer shutter speed and lower ISO. If you leave the G1000 on auto I think it will be too bright.
I'll give it a try. I was actually doing just the opposite...turning the brightness up as much as we could stand for it being dark outside... I guess that did mess things up a little. I've tried this type of shot quite a few times also and never had too much luck.
Atomother From United States of America, joined May 1999, 440 posts, RR: 3
Reply 4, posted (9 years 11 months 1 week 6 days 12 hours ago) and read 2885 times:
I just recently discovered that you can manipulate the MFD and PFD seperately. Before I was just using the knobs on the left side. As soon as I found the softkey and took the brightness off of auto my students started seeing a whole lot less of that PFD and we still kept the TIS going on the MFD. That will teach em to look inside so much. The same feature is good for dimming the screen at night for a good photo I would think. I found that if you have it too bright or on auto the camera will pick that up more and it blows the rest of your shot.