Alibo5NGN From United States of America, joined Oct 2006, 773 posts, RR: 1 Posted (8 years 6 months 2 weeks 2 days ago) and read 3559 times:
I am still relatively new to aviation photography and DSLR. I am still working my way towards getting it right. I have achieved some successes and some failures along the way. But thanks to the advice, inputs, opinions and critiques of Anetters, I have come a long way.
My focus in Aviation photography (which is a hobby for me), is on the difficult stuff. The only way I can move ahead is to study the works of successful Anetters and ask for advice on shots that are difficult to place. Below are 8 photos I took while transitioning from a point and shoot to a DSLR. They may not be the best, but they cover potential motive and quality issues. Your constructive criticism as to the chances of these photos passing the scrutiny of our able screeners would be greatly appreciated.
Thank you. Ken.
It takes knowledge to make a career. It takes wisdom to live a life.
Timdegroot From Netherlands, joined Apr 2002, 3674 posts, RR: 63
Reply 1, posted (8 years 6 months 2 weeks 2 days ago) and read 3550 times:
Heathaze is a problem in almost all of these shots. I can't see any of these making the grade here although you are probably well on your way. I'd say the 1st shot is the best attempt although it still looks soft.
Also the last two have a pole blocking the aircraft = motive.
AviatorG From St. Lucia, joined Apr 2005, 265 posts, RR: 1
Reply 4, posted (8 years 6 months 3 days 6 hours ago) and read 3322 times:
Quoting Alibo5NGN (Thread starter): My focus in Aviation photography (which is a hobby for me), is on the difficult stuff. The only way I can move ahead is to study the works of successful Anetters and ask for advice on shots that are difficult to place.
My feelings exactly
All great shots, although I believe #2 looks 'excessively' blurry or 'out-of-focus'. (Perhaps its just me..) Sunset shots can usually make great motives, and from the above set, I like #3 most. Good luck getting them into the database.