FlightShadow From United States of America, joined Jun 2005, 862 posts, RR: 7 Posted (6 years 2 months 2 weeks 2 days 10 hours ago) and read 1370 times:
Hi everyone
I have this shot of a UPS DC-8 in SLC. It looks really un-level to me, but I leveled it with the utility pole under the tail. I'm not sure if the ramp is sloped, or the pole isn't straight, and I just can't decide if the horizon looks level or not.
Aussie18 From Australia, joined Jun 2005, 1609 posts, RR: 10 Reply 1, posted (6 years 2 months 2 weeks 2 days 9 hours ago) and read 1363 times:
AIRLINERS.NET CREW PHOTO SCREENER
Nice photo Jeff,
the photo does seem level but does seem abit soft around front of aircraft,wait for others reply before pulling it as could be the crappy monitor im on.
DC10Tim From United Kingdom, joined Jan 2005, 1405 posts, RR: 16 Reply 2, posted (6 years 2 months 2 weeks 2 days 9 hours ago) and read 1363 times:
Jeff,
It looks pretty level to me. I would have chosen the "horizon" at the far end of the ramp that runs beneath the rear of the fuselage to level with. It covers nearly half of the shot, so should give a decent representation, and I just had a quick look in Photoshop and it seems dead level.
Lamp poles are prone to sloping As for the quality, that seems fine too. There are some slight jaggies on the yellow stripe part of the livery and on the rudder part of the tail, but nothing to worry about I don't think.
FlightShadow From United States of America, joined Jun 2005, 862 posts, RR: 7 Reply 3, posted (6 years 2 months 2 weeks 2 days 9 hours ago) and read 1358 times:
Thanks for the quick replies guys, I'll leave it in for now. I've had a few level rejections as of late so I'm trying to be a little more cautious
FlightShadow From United States of America, joined Jun 2005, 862 posts, RR: 7 Reply 5, posted (6 years 2 months 1 week 2 days 17 hours ago) and read 1278 times:
Thanks for the advice Mark, Tim, and Hongyin. As of right now the photo is 2nd runner up for top of the day
Sponsor Message: 
From United States of America, joined Jun 2005, 862 posts, 
From Australia, joined Jun 2005, 1609 posts, 
From United Kingdom, joined Jan 2005, 1405 posts, 
From Canada, joined Apr 2005, 1193 posts, 
Printer friendly format 
