Skylens From Ireland, joined Jun 2006, 2 posts, RR: 0
Reply 3, posted (6 years 7 months 23 hours ago) and read 1514 times:
I had a quick look at your image, and I think that you were unfortunate to have it rejected.
Presuming this was shot on digital, what ISO settingv did you use for this shot? A high ISO
setting will produce digital noise (similar to grain in high sensitivity film) on most digital cameras.
Eg ISO 400 or above, depending on the camera make/model.
Your image appears to have a slight magenta (red/pink) colour cast - in other words the white (on
the side of the plane) is not pure white, but has some colour in it. This could have been caused by
two things; your camera's White Balance adjustment not being quite right (Refer to your camera's
manual for details on White Balance); or in post camera image editing on your computer.
if your monitor is not correctly calibrated. Most LCD monitors, by default, have a cyan/blue color cast
(the opposite of Magenta) so if your LCD is like that and you corrected for it in image editing, then this
would mean that your image has been overcorrected for the LCD's blue cast, resulting in Magenta whites.
Solution - calibrate your LCD ( Ref www.colourconfidence.com )