Rejected. Your Ideas. — Aviation Photography Forum

Sponsor Message:


My Starred Topics \| Profile \| New Topic \| Forum Index \| Help \| Search

Rejected. Your Ideas.

Kkonstantin From Russia, joined Jun 2008, 8 posts, RR: 0
Posted (4 years 10 months 2 days 11 hours ago) and read 1117 times:

Posted this photo: http://www.airliners.net/addphotos/big/ready/APPEAL_20080720_VPBYJ.jpg

Reject reason - colour centered.

Any toughts?

6 replies: All unread, jump to last

DM From United States of America, joined Aug 2006, 336 posts, RR: 0
Reply 1, posted (4 years 10 months 2 days 11 hours ago) and read 1109 times:

Quoting Kkonstantin (Thread starter):
Any toughts?

It looks like the image has a blue cast to it. Centered rejection is correct since the aircraft is too low in the frame.

Could you post the original image resized?

[Edited 2008-07-21 01:30:15]

Kkonstantin From Russia, joined Jun 2008, 8 posts, RR: 0
Reply 2, posted (4 years 10 months 2 days 10 hours ago) and read 1093 times:

Unfortunately my status doesn't allow to attach images. The posted photo is actually original - converted from RAW in DPP Canon utility without any white balance correction (just crop and noise reduction later in PS). On my calibrated monitor it looked fine and I decided not to make any corrections.

DM From United States of America, joined Aug 2006, 336 posts, RR: 0
Reply 3, posted (4 years 10 months 2 days 9 hours ago) and read 1081 times:

If the original image is too low in the frame i wouldn't try to edit the shot since the size of the image will be out of A.nets requirement.

DM

Dendrobatid From United Kingdom, joined Nov 2004, 1605 posts, RR: 65
Reply 4, posted (4 years 10 months 2 days 8 hours ago) and read 1073 times:

Support Airliners.net - become a First Class Member!

Quoting DM (Reply 3):
If the original image is too low in the frame i wouldn't try to edit the shot since the size of the image will be out of A.nets requirement.

Not necessarily.....
Try cropping closely to the wingtips and take some off of the top and you might just get away with it. At 1024 wide the minimum size is 683 high.
It is too blue

Mick Bajcar

ZakHH From , joined Dec 1969, posts, RR:
Reply 5, posted (4 years 10 months 2 days 3 hours ago) and read 1001 times:

Quoting Dendrobatid (Reply 4):
It is too blue

Why would you say so? I don't have PS at hand, but the first visual impression is good (I'm sitting at a freshly calibrated monitor as well). Whites look white, can't see any cast.

Anyway, as I said - visual impression only.

Kkonstantin From Russia, joined Jun 2008, 8 posts, RR: 0
Reply 6, posted (4 years 10 months 2 days 1 hour ago) and read 982 times:

All the same. I have just recalibrated monitor. Checked connection and just as for the experiment changed LCD to CRT monitor, calibrated and saw no difference. Where is the BUG ????

Top Of Page

Forum Index

This topic is archived and can not be replied to any more.

Printer friendly format

Similar topics: