RonS From United States of America, joined Feb 2009, 762 posts, RR: 22 Posted (5 years 4 months 3 weeks 2 days 18 hours ago) and read 2038 times:
I have this photo of this Swiss Airbus A340 that I am trying to get accepted. I've done some editing, but for some reason I get this blue tint on the upper part of the fuselage. I'm not sure if I'm doing some thing wrong, or perhaps that this is a nightime shot...well, just after sunset. Do I need to do anything special to get rid of the blue tint on top besides the usual level, crop, levels, contrast,saturation, sharpen?
Also, I'm levelly challenged. Should I use the runway in back to level this?
RonS From United States of America, joined Feb 2009, 762 posts, RR: 22
Reply 5, posted (5 years 4 months 2 weeks 6 days 9 hours ago) and read 1917 times:
Hello guys. I just want to see if I could get a few more comments on this Swiss aircraft. I also want to understand why I'm getting that blue tine ontop of the fuselage. I also don't want to waste the screeners time by submitting something that I think is good, but I know has an issue or two.
Any other thoughts about this photo and why I'm getting the blue tint and what can be done about it ?
In advance, thanks!
All opinions expressed by me are my own opinions & do not represent the opinions in any way of my employers.
Ruudb From Netherlands, joined Jun 2005, 164 posts, RR: 5
Reply 6, posted (5 years 4 months 2 weeks 6 days 6 hours ago) and read 1904 times:
There is also a noise problem, I think you sharpened it too far, there is some evidence under the motor, but if you sharpen you have to watch out that you are not going too far, hence the noise will be sharper too, or better it is getting more obvious. Or your pictures was underexposed and when you try to get it lighter will introduce noise as well. The blue can be a white balance problem, try to change that, maybe the result will become better.