Sponsor Message:
Aviation Photography Forum
My Starred Topics | Profile | New Topic | Forum Index | Help | Search 
D200 FEE Message  
User currently offlineSluger020889 From United States of America, joined Mar 2005, 456 posts, RR: 2
Posted (5 years 4 months 4 days 6 hours ago) and read 3213 times:

Hello,

While out taking some pictures this morning with my D200 and 300 F4 AF-S, coupled with a Kenko 1.4x, my view finder just went black, the camera would still take pictures just everything (the shot and view finder was black.) So I went back inside and cleaned everything off as well as defrosted everything, going from a cool condo on the beach to the hot and humid florida beach air fogs everything up completely.

Once I got everything back inside and wiped off I come to realize that all my lenses with a manual aperture ring (my 300 F4 AF-S and my 50 1.8D) get an fEE message on my D200, which according to the manual means the lens aperture ring is not locked at its lowest setting (which it is). Now on the other hand, all my other AF-S/HSM lenses work fine, as well as the two lenses with the aperture rings (the 300 and 50) work fine on my D50.

Just to clarify:

Nikon 300 F4 AF-S (fEE with D200, works fine with D50)
Nikon 50 1.8D (fEE with D200, works fine with D50)
Nikon 24-85 AF-S (fine on both)
Sigma 10-20 HSM (fine on both)

So I believe its safe to say it's a problem with the D200 lens mount. Is it possible something got fried by all of the condensation?

I have a full warranty on the D200, which is at least a bit comforting.

Anyone else experience this?

Joey


I would love to fly a cargo plane full of rubber dog shit out of Hong Kong!
13 replies: All unread, jump to last
 
User currently offlineViv From Ireland, joined May 2005, 3142 posts, RR: 28
Reply 1, posted (5 years 4 months 3 days 23 hours ago) and read 3161 times:

I had this problem with a D200.

I removed the lens then put it on again. Worked fine after that. Made me miss a grezt action shot. Grrr.



Nikon D700, Nikkor 80-400, Fuji X Pro 1, Fujinon 35 f/1.4, Fujinon 18 f/2
User currently offlineNIKV69 From , joined Dec 1969, posts, RR:
Reply 2, posted (5 years 4 months 3 days 22 hours ago) and read 3149 times:

Joey do I have a tale for you.

I just got my D200 back from Nikon after a month ordeal. My D200 gave me the same problem. Sometimes it would work sometimes it wouldn't giving me that "FEE" error. Luckily while in LAS it worked most of the time so I waited till I got back to NY to get it looked at. Since the Melville Nikon headquarters is a short drive I dropped it off with specific instructions to diagnose the problem because Nikon likes to just replace parts and not figure out the problem so after the first go around they replaced a whole bunch of stuff including the lens mount. When I picked it up lo and behold the problem still existed. I went ape and told the person I was not paying another dime and wanted the problem found and fixed properly. They were very nice but had my camera going on a month! Not to mention Nikon subs out their phone CS and it's crap. Some guy in Canada or something looking at the same webpage I am that kept saying my camera was "in shop". So I drove there and asked that my camera cease being held hostage. In which some woman came out and basically said it sat somewhere and just needed a part replaced and it would be done the next day. The invoice is being sent to me with what they did but I suspect its the circut wiring up top. If you send it to Nikon Joey be very careful and specific or you won't see your camera for ahwile. I will update you on what the invoice says when I get it.

[Edited 2009-06-23 15:05:43]

User currently offlineSluger020889 From United States of America, joined Mar 2005, 456 posts, RR: 2
Reply 3, posted (5 years 4 months 3 days 20 hours ago) and read 3124 times:

Thanks for that Nick.

Did anything happen to your camera or did it just stop working out of the blue? When I had walked outside this morning there was pretty much standing drops of water on my camera from all the heat and humidity.

As much as I hate to admit it, I wasn't using the camera when it happened, I was out trying to surf and my friend called me over and said everything was black, and it was, the view finder was solid black as were the shots it took. He says he didn't touch anything but there's no telling.

My friend Maciek is coming by tomorrow and I'm going to give his 80-400 and his 16-85 a shot and see if the problem persists with his gear.

Thanks for the heads up on Nikon too, I bought my D200 from Ritz way back when and have repurchased the extended warranty for it back when I smashed the LCD screen back in January. Ritz had it sent away and back like new in about 3 weeks I believe. Hopefully their performance is kept up.

Joey

[Edited 2009-06-23 17:13:25]


I would love to fly a cargo plane full of rubber dog shit out of Hong Kong!
User currently offlineNIKV69 From , joined Dec 1969, posts, RR:
Reply 4, posted (5 years 4 months 3 days 20 hours ago) and read 3119 times:

Quoting Sluger020889 (Reply 3):
Did anything happen to your camera or did it just stop working out of the blue? When I had walked outside this morning there was pretty much standing drops of water on my camera from all the heat and humidity.

Just started getting the error message one day. Like you I switched lenses and it went away but got worse as time went by.

Quoting Sluger020889 (Reply 3):
As much as I hate to admit it, I wasn't using the camera when it happened, I was out trying to surf and my friend called me over and said everything was black, and it was, the view finder was solid black as were the shots it took. He says he didn't touch anything but there's no telling.

Yep it's something inside the camera. I am beginning to think it is a design thing.

Quoting Sluger020889 (Reply 3):
My friend Maciek is coming by tomorrow and I'm going to give his 80-400 and his 16-85 a shot and see if the problem persists with his gear.

It should still give you the trouble only with lenses with aperture rings because it is an issue with the connection on top and inside of the lens mount.

Quoting Sluger020889 (Reply 3):
Thanks for the heads up on Nikon too, I bought my D200 from Ritz way back when and have repurchased the extended warranty for it back when I smashed the LCD screen back in January. Ritz had it sent away and back like new in about 3 weeks I believe. Hopefully their performance is kept up.

Joey

I'd be willing to bet they are sending to Nikon. Keep me posted.

[Edited 2009-06-23 17:26:50]

User currently offlineSluger020889 From United States of America, joined Mar 2005, 456 posts, RR: 2
Reply 5, posted (5 years 4 months 3 days 19 hours ago) and read 3113 times:



Quoting NIKV69 (Reply 4):
I'd be willing to bet they are sending to Nikon. Keep me posted.

Very true, in talking to the people at Ritz, they first send it to one of their repair centers and if they can't fix it then they send it to Nikon.

We'll be in touch.

Joey



I would love to fly a cargo plane full of rubber dog shit out of Hong Kong!
User currently offlinePhotopilot From Canada, joined Jul 2002, 2771 posts, RR: 18
Reply 6, posted (5 years 4 months 3 days 19 hours ago) and read 3112 times:

http://forums.dpreview.com/forums/re...&message=32030276&q=fee+error&qf=m

Check out the above thread from the DPReview website. It explains it better and possible causes for the FEE error.

It's basically caused by the mechanical ring on the body side of the lens mount that is spring loaded and follows the aperature ring around. The little "tab" that can fold up or down on the lens aperature ring engages this sprint loaded ring on the body and gives the body the aperature info as to min aperature. A mismatch in this reading will result in an FEE error. You can often clear the error by moving body ring with a fingernail. Sometimes a small piece of grit either jams or slows this movement. That's also why it appears transient.


User currently offlineNIKV69 From , joined Dec 1969, posts, RR:
Reply 7, posted (5 years 4 months 3 days 19 hours ago) and read 3108 times:



Quoting Photopilot (Reply 6):
It's basically caused by the mechanical ring on the body side of the lens mount that is spring loaded and follows the aperature ring around. The little "tab" that can fold up or down on the lens aperature ring engages this sprint loaded ring on the body and gives the body the aperature info as to min aperature. A mismatch in this reading will result in an FEE error. You can often clear the error by moving body ring with a fingernail. Sometimes a small piece of grit either jams or slows this movement. That's also why it appears transient.

Though this is true it was not the case in my camera.


User currently offlineCpd From Australia, joined Jun 2008, 4879 posts, RR: 37
Reply 8, posted (5 years 4 months 3 days 17 hours ago) and read 3102 times:

I this case, I doubt it is an issue with the aperture control ring and associated mechanisms.

While not having the ring set to F/32 will cause the fEE error - I suspect this is something more to do with the humidity/condensation.

Quoting NIKV69 (Reply 2):
If you send it to Nikon Joey be very careful and specific or you won't see your camera for ahwile

Good advice for anyone dealing with any large corporation. My D700 issues were resolved adequately by Nikon eventually (and quickly) so I can no longer complain. I also got a lens checked at the same time for no extra cost (even though it was bought in NY, not locally).


User currently offlineNIKV69 From , joined Dec 1969, posts, RR:
Reply 9, posted (5 years 4 months 3 days 2 hours ago) and read 3054 times:



Quoting Cpd (Reply 8):
While not having the ring set to F/32 will cause the fEE error - I suspect this is something more to do with the humidity/condensation.

Personally I have my own theory. I think it has to do with the contacts just inside the lens mount that for some reason go bad with the constant changing of lenses. I know they replaced something inside the camera. Can't wait to get the invoice.


User currently offlineNIKV69 From , joined Dec 1969, posts, RR:
Reply 10, posted (5 years 4 months 4 hours ago) and read 2980 times:

Ok just got the invoice from Nikon and it's more confusing than ever. Here is what it says

GENERAL CHECK AND CLEAN
RPL SHUTTER MECHANISM
ADJ AUTOFOCUS OPERATION

Oh well the camera works so I guess it's ok  faint 


User currently offlineSluger020889 From United States of America, joined Mar 2005, 456 posts, RR: 2
Reply 11, posted (5 years 4 months 1 hour ago) and read 2961 times:



Quoting NIKV69 (Reply 10):
GENERAL CHECK AND CLEAN
RPL SHUTTER MECHANISM
ADJ AUTOFOCUS OPERATION

mmm you got a new shutter out of the deal? and I'm thinking "ADJ Autofocus" is a blanket term that could mean just about anything.

Maybe I'll just take a hammer to my D200 and get a little upgrade...haha



I would love to fly a cargo plane full of rubber dog shit out of Hong Kong!
User currently offlineNIKV69 From , joined Dec 1969, posts, RR:
Reply 12, posted (5 years 3 months 4 weeks 1 day 18 hours ago) and read 2941 times:



Quoting Sluger020889 (Reply 11):
mmm you got a new shutter out of the deal? and I'm thinking "ADJ Autofocus" is a blanket term that could mean just about anything.

Maybe I'll just take a hammer to my D200 and get a little upgrade...haha

Well keep it as a backup.  biggrin  as for the rest Nikon repair leaves a lot to be desired. Nobody seems to know anything about what is going on. It's really depressing to invest in the best imaging equipment and go through this every time I need repair or service.


User currently offlineSilver1SWA From United States of America, joined Mar 2004, 4838 posts, RR: 26
Reply 13, posted (5 years 3 months 4 weeks 1 day 14 hours ago) and read 2928 times:
Support Airliners.net - become a First Class Member!



Quoting NIKV69 (Reply 12):
invest in the best imaging equipment

I didn't know you got a Canon!

Quoting NIKV69 (Reply 12):
go through this every time I need repair or service

Oh wait...I see you're still talking about Nikon. My bad...

 Wink Big grin  duck 



ALL views, opinions expressed are mine ONLY and are NOT representative of those shared by Southwest Airlines Co.
Top Of Page
Forum Index

This topic is archived and can not be replied to any more.

Printer friendly format

Similar topics:More similar topics...
An Important Message From The Airliners.net Crew posted Tue Mar 31 2009 10:42:43 by Moderators
A Message From Paulo's Family posted Thu Feb 5 2009 18:43:07 by Moderators
A Message From Courtney Montpas Of Demand Media posted Thu Feb 5 2009 18:26:48 by Moderators
Fee And Usage posted Wed Aug 6 2008 03:16:30 by Wietse
A Message To All JFK Spotters posted Sat Jul 26 2008 14:21:56 by 76794p
For Sale: 2 X D200 And 2 X D2Xs posted Thu Aug 23 2007 06:26:15 by Psyops
Puzzling Personal Message From The Screener posted Fri Jul 20 2007 19:28:09 by Mgoran
D80 Or D200? posted Wed Jun 20 2007 10:07:37 by Skidmarks
Dilemma: A380, Dusty 400D And Backup D200 Help! posted Sat May 5 2007 16:15:50 by Deaphen
Fee For Unlimited Use Of A Photo posted Wed Mar 7 2007 22:56:01 by LOCsta