Stackhouse007 From United States of America, joined Nov 2007, 420 posts, RR: 1 Posted (5 years 2 months 3 weeks 5 days 17 hours ago) and read 2411 times:
Well this shot just got rejected for the following reason:
These photo(s) have blemishes on them. If the image is from a digital
single-lens reflex camera (DSLR), these blemishes may be dust spots ("dust
donuts"), which are often difficult to see. If the image is from a regular
digital camera, the blemishes are probably caused by dirt on the lens. If
the image is from a scanner, the blemishes may be dust, dirt or scratches.
Dlowwa From Canada, joined Apr 2005, 7328 posts, RR: 30
Reply 4, posted (5 years 2 months 3 weeks 1 day 13 hours ago) and read 2276 times:
Quoting Stackhouse007 (Reply 3): Alright I tried that.. Is this all I needed to do? Or can you still see it?
You've got the right idea, you've just got to be a little more subtle. It's ok to clone dust/blemishes out as long as it's not too obvious where you've done it. Try it again, and instead of cloning the cloud above the dust spot, clone the sky around it. It's a lot harder to tell you've cloned something if it's uniform like the sky. Clouds are tricky because you can usually see if you've obviously duplicated part of one.