YVRLTN From Canada, joined Oct 2006, 2935 posts, RR: 0 Posted (3 years 2 months 1 week 3 days 19 hours ago) and read 6356 times:
My venerable Canon EOS Rebel XT is coming up 7 years old and showing signs of needing replacement, no complaints after half a million trouble free shots.
My main lens is a Sigma 50-500 (unfortunately non IS) and I also use a Sigma 18-200 and a Canon 18-55, obviously all with Canon mounts so I wish to stick to Canon.
I am not exactly looking to upload photos to a.net, really all I want is decent enough shots to share with the flickr community, but primarily for my own hobby which is more of recording the memory of the unusual aircraft, more than the photography itself if that makes sense. I also use it a lot for general photography at weekends and for vacations. I try to be a little artistic with my shots, particularly with the range of the Bigma allowing you to snap away just because you can, but Im not a tech guy and I want something as simple to operate as possible without too many functions and long menus to get my small brain around.
Ideally I want an inbuilt flash as I dont want to have to pay for one as well as the camera at this point and I do use it indoors (weddings / conferences / dark warehouses / inside shipping containers etc) a fair bit, but this is not a deal breaker.
Budget - I dont want to spend crazy money for the latest and greatest just because it is the latest and greatest, as it is only a hobby and not an a.net standard one at that, anything on sale today will be better than my 7 year old model (I am hoping anyway), but I am willing to spend middle of the range and beyond prices if it will last be another 7 years of near daily use as I believe in you get what you pay for and I also want make the most of my Bigma.
Bearing all that in mind and the strengths and weaknesses of the Bigma (needs light etc...) what body do you recommend?
dazbo5 From United Kingdom, joined Mar 2005, 2962 posts, RR: 2
Reply 1, posted (3 years 2 months 1 week 3 days 17 hours ago) and read 6339 times:
Quoting YVRLTN (Thread starter): Bearing all that in mind and the strengths and weaknesses of the Bigma (needs light etc...) what body do you recommend?
I've been using the Bigma on a 50D for the past 4 years and a 350D for 2 years prior to that. It really comes down to what you want from the camera. In all honestly, from what you describe, you may not get much of a benefit from upgrading the body. You'll get a few more pixels (not that it makes a lot of difference), slightly better noise performance and a few extra buttons and options if you go for say a 600D or 650D. I went for the 50D at the time as it's a better balance with the larger body on a big lens like the Bigma and faster frame rate. If you did want an upgrade body, a 60D is worth looking at but if your budget won't go quite that far, a 600D or 650D will fit the brief. Just go down to your local Canon dealer and have a feel of them.
Equipment: 2x Canon EOS 50D; Sigma 10-20 EX DC HSM, 50-500 EX APO DG, Canon 24-105 f/4 L, Speedlite 430EX
vikkyvik From United States of America, joined Jul 2003, 12077 posts, RR: 24
Reply 6, posted (3 years 2 months 1 week 2 days 21 hours ago) and read 6228 times:
Quoting epten (Reply 2): No point "upgrading" to a same sensor size imo.
I'd say that might be true, if you were strictly upgrading for image quality reasons. Myself, I upgraded from a 1000D to a 50D because I wanted a larger ISO range, larger buffer, faster shooting, control wheel, and probably some other stuff I don't remember anymore. Image quality does happen to be improved as well, but that wasn't my major concern.