VgnAtl747 From United States of America, joined Apr 2001, 1536 posts, RR: 2 Posted (14 years 1 month 2 weeks 15 hours ago) and read 903 times:
I have a panoramic photograph that I would like to enlarge to a panoramic poster. It's not an aviation photograph, but rather a photo of the Presidential palace I took while on vacation in Berlin. I thought that the photographers in this forum might know where I can take it to get it enlarger. The original size is approximately 10" x 4". I want to enlarge it to be something in the area of 36" wide (remaining proportional of course). I have been looking on the internet for a company capable of doing this. Any suggestions? If anybody has had something similar done, and you don't mind sharing how much it cost, I'd be curious.
I have one minor problem and that is that I don't have a negative. The photo was taken with a Kodak APS camera, and I do however have the canister. So maybe I can send the company the canister or the print itself.
Thanks for your help.
Staffan From , joined Dec 1969, posts, RR:
Reply 1, posted (14 years 1 month 2 weeks 15 hours ago) and read 888 times:
I'd take it in to a photo shop, they'd be able to give you more info on how to do, and what it wil cost you. However, the lense and the small format of the APS film will limit how big it can be enlarged, and how good it will look. Might not even be worth enlarging it.
However, I'd go to a shop and ask if they can do it and what it would cost, and decide from there.
VgnAtl747 From United States of America, joined Apr 2001, 1536 posts, RR: 2
Reply 2, posted (14 years 1 month 2 weeks 11 hours ago) and read 876 times:
Thanks. The developer said that they can enlarge it so its 15" wide, but I was looking into companies that print murals and stuff. I got some replies from some of them saying they scan the print then enlarge that. I'm starting to be unsure over the whole thing though. I don't want to pay $80 to have a mural company do it then have it look like crap. Thats why I asked if anyone had something similar done. Thanks for your comment.