Ckw From UK - England, joined Aug 2010, 692 posts, RR: 17
Reply 1, posted (11 years 6 months 2 weeks 6 days 9 hours ago) and read 3265 times:
I find that in most cases the D60 does a good job with the "auto" setting. Where this doesn't work so well (say, mixed lighting) I prefer to adjust colour balance when converting the RAW file - using Breezebrowser, it is possible to select a white point in the image and the software will then apply the appropriate custom white balance.
JetTrader From United Kingdom, joined Oct 2001, 586 posts, RR: 12
Reply 2, posted (11 years 6 months 2 weeks 6 days 9 hours ago) and read 3256 times:
I think you'll find the consensus is to use AWB (Auto White Balance) and to make any corrections (if required) later in Photoshop (or similar).
Shooting in RAW mode (not something I do) allows you to apply white balance when extracting the image so you can then try various settings...and then again do any further adjustments in Photoshop afterwards.
I will sometimes (if it is either fully overcast or there is no cloud at all) use the corresponding white balance setting on the camera but have yet to see and obvious differences...