Airplanenut From United States of America, joined Sep 2001, 649 posts, RR: 1 Posted (10 years 6 months 1 week 5 days 21 hours ago) and read 2184 times:
I stopped trying with the one for a few months, then I got a new scanner and tried again. I know that this has been tried a few times, but...
The plane itself is one of 7 in the fleet, and the color scheme/reg is original to the DB. The plane in the background is also original to the DB. I really thought the quality was rising with the new scan/new colors, but Johan rejected an appeal that the quality was still too low.
Do you have any suggestions of what I should do- some parts too grainy/others not sharp enough?
Serge From United States of America, joined Sep 2001, 1989 posts, RR: 3 Reply 5, posted (10 years 6 months 1 week 5 days 11 hours ago) and read 2089 times:
Hmmm... Now it looks oversharpened evidenced by the jaggies and distortion on sharp lines. I think its hopelesss because it appears as if the sun was high and somewhat behind the aircraft (high rear left), that is the worst type of sun angle for a scanned print in my experience (assuming this is a scanned print).
Keep trying and try and keep the sun behind you!