MUC_Spotter From Cayman Islands, joined Apr 2002, 155 posts, RR: 2
Reply 3, posted (10 years 8 months 1 week 3 days 21 hours ago) and read 1046 times:
some small math:
100*75cm should be about 40*30inch which will bring you with 150dpi to
Therefore I do not think that you will be able to supply that shot in a satisfying quality.
@Clickhappy: do you think PS will do miracles and make that size out of a 2.1MP camera?
Skymonster From , joined Dec 1969, posts, RR:
Reply 6, posted (10 years 8 months 1 week 3 days 14 hours ago) and read 1000 times:
100*75cm should be about 40*30inch which will bring you with 150dpi to 6000x4500 pixel
To be precise, a print of 100x75cm at 150 pixels per inch (not dots per inch, there's a difference) requires an input size of 5906x4429 pixels - or around a 26MP camera if the image goes straight from sensor to output without cropping!
And therein lies the problem with shooting digital I guess... From a 10D/D60 size image, you might be able to interpolate up to that sort of size, but I'm not sure I'd want to hang my reputation on it. From anything much lower resolution, I doubt its going to work. A scan of a slide made by the right professional lab, however, could comfortably get you into that arena.