Runway23 From US Minor Outlying Islands, joined Jan 2005, 2369 posts, RR: 32 Posted (9 years 8 months 3 weeks 6 days 11 hours ago) and read 6531 times:
It appears I have just used my washing machine for the first time since I acquired it a few days ago.
However, my rhaa of a problem is that there is quite a bit of water/liquid left inside the machine after usage (I estimate about 1.5-2L). I never had that problem before when using other similar models made by the same company.
The make of the aforementioned washing machine is Beko, does anybody have a clue about this or how to solve my rhaaing problem?
Sean377 From United Kingdom, joined Mar 2001, 1225 posts, RR: 36
Reply 3, posted (9 years 8 months 3 weeks 6 days 11 hours ago) and read 6515 times:
Same problem as ours at the moment. I've put mine down to a defective program selector switch. I can get it to empty by selecting an alternative spin cycle to the one which follows the normal wash cycle.
If that doesn't work, then you could have a blockage or the pump could be gooshed.
Flying is the second greatest thrill known to man... Landing is the first!
TWISTEDWHISPER From Sweden, joined Aug 2003, 716 posts, RR: 2
Reply 7, posted (9 years 8 months 3 weeks 6 days 10 hours ago) and read 6480 times:
The problem is probably a faulty installed drainage valve, it might also be a flaw in the program. You should return it, and they should replace it (the machine, the valve or the IC circuits)
Yes, I used to do maintence on washing machines, dishwashers and dryers.