Vafi88 From United States of America, joined Apr 2001, 3116 posts, RR: 15 Posted (11 years 8 months 3 weeks 5 days 13 hours ago) and read 2337 times:
Hey guys. I've been procrastinating a little bit, and with the test tomorrow, I'm having to write out the whole equation (which takes about 10 minutes and is about 3 miles long). I need to know how to plug it into my TI-83 so I can actually do all of the problems on my test tomorrow. I know how to get to the standard deviation. I get to:
2nd - Stat, then scroll to MATH, and then go down to StdDev(
I don't know what to plug into the parenthasies from StdDEV(
If any of you can help, it'd greatly be appreciated.
I'd like to elect a president that has a Higher IQ than a retarted ant.
7574EVER From United States of America, joined Jan 2004, 478 posts, RR: 4
Reply 2, posted (11 years 8 months 3 weeks 5 days 10 hours ago) and read 2317 times:
Here's the way my professor taught us to do it. Remember the acronym..
The first letter of each word is the next step that needs to be done.
1.)Mean - figure out the mean (average) of all the numbers being used
2.)Dogs - figure out the deviation of all the numbers being used
3.)Send - square each of the deviations
4.)Meannies - figure out the mean of all the new numbers from step three.
5.)Running- then get the square root of the answer to step four.
After step five you should have the standard deviation.
I know you wanted to know how to put in into the TI-83, but since I can't help you there hopfully this can make it easier if you end up doing it on paper
Right rudder....Right rudder...Come on, more right rudder....Right rudder......Aw forget it, I quit!!