http://www.airliners.net/aviation-forums/photography_feedback/read.main/368624/
Username: 757ER
Posted 2012-11-20 03:24:12 and read 525 times.
Hello,
What do you think of this picture?
http://farm9.staticflickr.com/8348/8201153452_3a88c92740_o.jpg
[Edited 2012-11-20 03:24:33]
Username: dazbo5
Posted 2012-11-20 04:24:10 and read 526 times.
Quoting 757ER (Thread starter):
What do you think of this picture?
There's too much dead space around the aircraft, you need to crop it tighter. The quality isn't great either. The fence line on the landing gear may bring a motive rejection. I would be surprised if this one got through screening.
Darren
Username: 757ER
Posted 2012-11-20 13:40:48 and read 526 times.
Ok thanks a lot. I completely missed the fence line on the landing gear. When you see quality what do you mean? Sharpness or noise?
I have another one from another spot
http://farm9.staticflickr.com/8065/8204396348_53038c7190_o.jpg
[Edited 2012-11-20 13:41:31]
Username: dlowwa
Posted 2012-11-20 13:46:35 and read 526 times.
Quoting 757ER (Reply 2):
I have another one from another spot
This one is oversharpened and has many dust spots.
Username: 757ER
Posted 2012-11-20 14:30:41 and read 526 times.
Any better or too soft now?
http://farm9.staticflickr.com/8347/8203415769_8785f5d7c0_o.jpg
Username: dlowwa
Posted 2012-11-20 14:37:32 and read 526 times.
Quoting 757ER (Reply 4):
Any better or too soft now?
Better, but still has a few dust spots.
Username: 757ER
Posted 2012-11-20 14:41:08 and read 525 times.
Hey thanks a lot for your help. Ι must clean my sensor 
Should I leave the sharpness as it is? I am not a big fan of oversharpenning but all the rejections so far where for soft and I guess I am oversharpenning now
Username: dlowwa
Posted 2012-11-20 16:53:10 and read 520 times.
Quoting 757ER (Reply 6):
Should I leave the sharpness as it is?
Still looks a bit sharp, but at least better than the previous version.
Copyright © Lundgren Aerospace. All rights reserved.
http://www.airliners.net/