Sponsor Message:
Aviation Technical / Operations Forum
My Starred Topics | Profile | New Topic | Forum Index | Help | Search 
Painting The 787  
User currently offlineDl757md From United States of America, joined May 2004, 1562 posts, RR: 16
Posted (9 years 2 months 6 days 4 hours ago) and read 3075 times:

I'm not trying to bash the 787 or Boeing, but thinking about the pervasive use of carbon fiber in it, I can't help but think of the MX difficulties that might result. More specifically I wonder how Boeing has addressed these issues. In addition to the fuel tank issue I brought up in another thread I wonder how the repainting of the 787 will be accomplished.

Working in the paint hangar at Delta for 2 years I know first hand the difficulties of repainting composites. Current composite panel construction and chemical paint stripping techniques don't mix. Currently all composites have to sanded with a DA(dual action) sander. This is a time consuming process. A 4X8 foot panel can take one person 8 hours to sand. Extreme care must be taken as it is very easy to remove too much material and before you know it you're into the structural plies of the panel. A time consuming repair is now required. Suffice it to say that a lot more labor will be required to repaint one of these babies and it will have to be very skilled. That is unless Boeing has or will develop new more economical refinishing methods.

Another problem I see is that paint can be considered an integral part of the composite. On metal, cracked paint just peels off, doing no damage to the metal. Cracks in paint on composites on the other hand propagate down into the resin matrix. There are different non structural protective plies applied to the top surface of the panel to resist this and in many cases a high build primer can be used to repair this. I have, however, seen 757 fan cowls that have been scrapped due to this phenomenon. They looked like somebody painted them in a faux crackle finish. I'm sure faulty refinishing is probably to blame but that just reinforces my point about the high skill level and extended time that will be required to refinish the 787. A cost factor that airlines might want to consider in their purchase analysis.

Dl757Md


757 Most beautiful airliner in the sky!
9 replies: All unread, jump to last
 
User currently offlineSATL382G From , joined Dec 1969, posts, RR:
Reply 1, posted (9 years 2 months 6 days 1 hour ago) and read 2943 times:

Given that composites won't corrode wouldn't the 787 need to be repainted less often?

User currently offlineDfwRevolution From United States of America, joined Jan 2010, 915 posts, RR: 51
Reply 2, posted (9 years 2 months 6 days 1 hour ago) and read 2943 times:

I get the feeling that Boeing knows what they are doing. They have already fabricated and painted test examples of the 787 fuselage.... givem them credit guys, it's their job to build airplanes. I think applying paint and repairing a dent has crossed their minds  Big grin



User currently offlineDl757md From United States of America, joined May 2004, 1562 posts, RR: 16
Reply 3, posted (9 years 2 months 6 days ago) and read 2921 times:

DfwRevolution

I think applying paint and repairing a dent has crossed their minds

I never questioned whether Boeing has thought about it, I asked what have they done about it.

More specifically I wonder how Boeing has addressed these issues.

Having a background in aircraft refinishing as well as overhaul, naturally I'm interested in what they have come up with to solve known issues with composites that to my knowledge haven't previously been addressed adequately. Expanding on my example of a fan cowl. It's one thing to trash a carbon fiber fan cowl because it's uneconomical to repair and quite another to trash an entire airplane. I'm sure if you would have asked Boeing when they designed the 757 they would have told you the fan cowls will last the lifetime of the airframe. I'm here to tell you that at least sometimes they don't. The only reason being is that they are made of carbon fiber. No service damage just exposure to vibration, fluids, and the elements. Now I completely agree that Boeing or anyone else for that matter wouldn't use carbon fiber for a whole airplane if they didn't have a lot of data to back it up. That's not the point I'm trying to make. Being a mechanic I just wonder how we'll fix it.

SATL382G
Given that composites won't corrode wouldn't the 787 need to be repainted less often?

Aluminum structures have the option of being painted due to the fact that Al forms a surface oxidation layer that protects the metal underneath. This is born out by the liveries of AA and others who use bare metal. Composites on the other hand MUST be painted to protect them from moisture and UV light both of which are very detrimental to composites.

Dl757Md



757 Most beautiful airliner in the sky!
User currently offlineDfwRevolution From United States of America, joined Jan 2010, 915 posts, RR: 51
Reply 4, posted (9 years 2 months 5 days 23 hours ago) and read 2895 times:

I never questioned whether Boeing has thought about it, I asked what have they done about it.

It isn't at all out of line to contact Boeing in these matters. Mention you're a humble avation enthusiast and ask a reasonable question and they will get back to you in a week or so. They would probably be happy to answer this question.

wwwmail.boeing2@boeing.com

Sorry if I jumped the gun a bit, but there have been a million "What will Boeing do when "X, Y, or Z" happens to the 787" threads.


User currently offlineDl757md From United States of America, joined May 2004, 1562 posts, RR: 16
Reply 5, posted (9 years 2 months 5 days 22 hours ago) and read 2879 times:

Ask Boeing! What and miss all the fun lively debate we have on this forum!
Never!!!
Seriously though, thanks for the good advice Dfw.  Smile

Dl757MD



757 Most beautiful airliner in the sky!
User currently offlineHAWK21M From India, joined Jan 2001, 31573 posts, RR: 57
Reply 6, posted (9 years 2 months 5 days 16 hours ago) and read 2816 times:

I think I can understand what DI757 is trying to get too.Although I also believe Boeing may have thought about this too in detail.
How effective will paint stay on a Composite Structure as compared to Al surface.
Is the Binding better on Composite.
regds
MEL



Think of the brighter side!
User currently offlineCCA From Hong Kong, joined Oct 2002, 797 posts, RR: 14
Reply 7, posted (9 years 2 months 5 days 14 hours ago) and read 2812 times:

I've just read a story in Aviation Week & Space Technology, which had a article on the 787 which discussed the carbon fiber issues. I'm afraid I can't find the magazine at the moment.

They discussed that Boeing built section 48 due to it's shape as it was the most difficult and therefore they would learn the most from. They also mentioned painting which explained that the die the carbon fiber layers are laid in is milled with a rough pattern which would be left on the surface of the aircraft structure after curing. The test piece they built had 4 different levels of roughness to see what was best, as it had to be enough for the paint to stick to but not too much as to cause drag.

Rgds CCA

[Edited 2005-02-15 10:44:10]


C152 G115 TB10 CAP10 SR-22 Be76 PA-34 NDN-1T C500 A330-300 A340-300 -600 B747-200F -200SF -400 -400F -400BCF -400ERF -8F
User currently offlineLMP737 From , joined Dec 1969, posts, RR:
Reply 8, posted (9 years 2 months 5 days 8 hours ago) and read 2769 times:

Years ago I remember reading that Boeing and 3M were looking at using thin polymer films, also known as appliques, instead of paint. The idea was that instead of painting they would apply these appliques. This would mean not having to paints and solvents. How hard it would be to remove I don't know. Here's a link with some more information. Whatever happened with this idea I don't know. Guess I'll have to do a bit more research.

http://www.boeing.com/news/releases/1997/news.release.970422.html


User currently offlineA350 From Germany, joined Nov 2004, 1100 posts, RR: 22
Reply 9, posted (9 years 1 month 3 weeks 1 day 7 hours ago) and read 2563 times:

Another possibility would be to use more different layers of paint. One layer could be a "stop layer" would be layer which (better) resists sanding, chemical stripping or whatever you are using to remove the paint. It's just speculation, but why not?

Another point is that Boeing claims D-check intervals of 12 years, so repainting won't be needed very often. In case of an operator change, maybe simply another paint layer may be applied without stripping?

Finally, I have never heard that the repainting of Airbus composite parts (e.g. vertical stab) is a big problem.

The paint issue is maybe a backdraw of composites, but in the overall calculation composites are still the best material for airliners.

Greetings from Berlin

A350

P.S.: sorry for all that speculation in this post



Photography - the art of observing, not the art of arranging
Top Of Page
Forum Index

Reply To This Topic Painting The 787
Username:
No username? Sign up now!
Password: 


Forgot Password? Be reminded.
Remember me on this computer (uses cookies)
  • Tech/Ops related posts only!
  • Not Tech/Ops related? Use the other forums
  • No adverts of any kind. This includes web pages.
  • No hostile language or criticizing of others.
  • Do not post copyright protected material.
  • Use relevant and describing topics.
  • Check if your post already been discussed.
  • Check your spelling!
  • DETAILED RULES
Add Images Add SmiliesPosting Help

Please check your spelling (press "Check Spelling" above)


Similar topics:More similar topics...
Carbon Fiber And The 787 posted Sat Jul 1 2006 19:44:06 by Firennice
Why No "Clarinet Look" On The 787? posted Wed Aug 31 2005 03:19:40 by Zippyjet
Why Is The Vert Stab So Small On 787? posted Fri May 6 2005 00:20:03 by Lemurs
Did You Know About The DC9-70? posted Tue Nov 14 2006 05:14:13 by 747400sp
FYI 787 Progress posted Sat Nov 11 2006 00:11:54 by Firennice
Why Does The Tower Give Out Altimetric Reading posted Fri Nov 10 2006 02:58:14 by YULspotter
Tri-motor - What's That On The Wing? posted Thu Nov 9 2006 00:50:53 by TimePilot
How Long Does The FAA Keep Records Of Arrivals? posted Tue Nov 7 2006 16:34:55 by Lenbrazil
Aicraft Procedure & The Airlines posted Sat Nov 4 2006 04:13:07 by HighFlyer9790
The Last Northwest DC-10 Flight posted Thu Nov 2 2006 21:08:48 by LemonKitty

Sponsor Message:
Printer friendly format