HAWK21M From India, joined Jan 2001, 31875 posts, RR: 54 Posted (12 years 4 months 2 weeks 1 day 5 hours ago) and read 3063 times:
Why is the Aisle stand checked for proper clearance between the thrust levers and the nylon strips, & if required rework to obtain .000 to .005 total clearance, throughout lever travel.
What is the purpose of these Nylon strips.
Air2gxs From , joined Dec 1969, posts, RR:
Reply 1, posted (12 years 4 months 2 weeks 1 day 1 hour ago) and read 3039 times:
Never having worked on the B737, I'll make an educated guess. Since the clearance goes from interference (.000) to .005 I would guess its just a dirt/dust shield to prevent FOD from falling into the pedestal. It could also act as a chafe strip to prvent the throttle sides from wearing due to side loads placed on the throttle, i.e. pushing at an angle instead of axially.