User avatar
HAWK21M
Topic Author
Posts: 29867
Joined: Fri Jan 05, 2001 10:05 pm

Number On Flap Surface - A319.

Fri Jul 29, 2005 2:34 am


View Large View Medium
Click here for bigger photo!

Photo © Luis Rosa


Explain the Number 2 written on the upper surface of the TE Flap.Is it ID no for the TE Flap Track Actuator.
regds
MEL

[Edited 2005-07-28 19:37:43]
I may not win often, but I damn well never lose!!! ;)
 
ua777222
Posts: 2987
Joined: Mon Dec 22, 2003 11:23 am

RE: Number On Flap Surface - A319.

Fri Jul 29, 2005 3:02 am

Quoting HAWK21M (Thread starter):
Explain the Number 2 written on the upper surface of the TE Flap.Is it ID no for the TE Flap Track Actuator.
regds

I too flew U2 last week and saw the same thing. Here's a shot I took that shows it as well;

http://img.photobucket.com/albums/v626/ua777222/newjet-.jpg

Seen on the right side so side has no difference.


Take care,

Matt
"It wasn't raining when Noah built the ark."
 
EMBQA
Posts: 7795
Joined: Sat Oct 25, 2003 3:52 am

RE: Number On Flap Surface - A319.

Fri Jul 29, 2005 7:21 am

That is actually not the number 2 but the location for attaching a lifting hook. The symble looks like a question mark with an underscored bottom. They are hard to see on the ExpressJet Embraer, but if you look on the nacelle you can see them in yellow.
View Large View Medium
Click here for bigger photo!

Photo © Bill Schloman



[Edited 2005-07-29 00:28:21]
"It's not the size of the dog in the fight, but the size of the fight in the dog"
 
troubleshooter
Posts: 420
Joined: Mon Feb 07, 2005 5:22 am

RE: Number On Flap Surface - A319.

Fri Jul 29, 2005 10:44 am

I agree with EMBQA. These markings locate the hoist kit attachment points.
This job sucks!!! I love this job!!!
 
User avatar
HAWK21M
Topic Author
Posts: 29867
Joined: Fri Jan 05, 2001 10:05 pm

RE: Number On Flap Surface - A319.

Fri Jul 29, 2005 1:36 pm

Quoting EMBQA (Reply 2):
That is actually not the number 2 but the location for attaching a lifting hook

Why on the Upper TF Flap of an A320.Also another symbol to its Left [Outboard side].
regds
MEL
I may not win often, but I damn well never lose!!! ;)
 
EMBQA
Posts: 7795
Joined: Sat Oct 25, 2003 3:52 am

RE: Number On Flap Surface - A319.

Fri Jul 29, 2005 2:05 pm

Why on the Upper TF Flap of an A320.Also another symbol to its Left [Outboard side]

If you look there are actually 3 locations. (One centered on the trailing edge) This is so if the flap needs to be removed it can be done so with a hoist. Using these three locations will the mechanics the balance points, and the flap can be easily removed.
"It's not the size of the dog in the fight, but the size of the fight in the dog"
 
User avatar
IFixPlanes
Posts: 239
Joined: Sun Feb 20, 2005 11:34 pm

RE: Number On Flap Surface - A319.

Fri Jul 29, 2005 4:20 pm



Ingo
never tell an engineer he is wrong ;-)
 
User avatar
HAWK21M
Topic Author
Posts: 29867
Joined: Fri Jan 05, 2001 10:05 pm

RE: Number On Flap Surface - A319.

Fri Jul 29, 2005 8:12 pm

Thanks for the Sketch.
regds
MEL
I may not win often, but I damn well never lose!!! ;)

Who is online

Users browsing this forum: No registered users and 16 guests