cc2314
Posts: 82
Joined: Tue Jan 08, 2008 1:15 pm

Fs2004 Aicraft Designer Needed!

Sat Aug 23, 2008 2:16 pm

I was just looking around the net and i cant find a good model of a L1011 tristar anywhere.
Would anyone be able to put together an L1011 with all the aditional cockpit parts,fmc,ins,wx radar,tcas.I would even be willing to pay up to 50euro...
 
ANITIX87
Posts: 2952
Joined: Mon Mar 07, 2005 4:52 am

RE: Fs2004 Aicraft Designer Needed!

Sat Aug 23, 2008 9:30 pm



Quoting Cc2314 (Thread starter):
I would even be willing to pay up to 50euro...

I'm not a FlightSim designer, but it seems like 50 Euro is way too little. I'm sure creating an aircraft takes days and days of work to perfect it.

Good luck finding someone, though!

TIS
www.stellaryear.com: Canon EOS 50D, Canon EOS 5DMkII, Sigma 50mm 1.4, Canon 24-70 2.8L II, Canon 100mm 2.8L, Canon 100-4
 
User avatar
Aaron747
Posts: 8525
Joined: Thu Aug 07, 2003 2:07 am

RE: Fs2004 Aicraft Designer Needed!

Sat Aug 23, 2008 10:43 pm

Are you kidding?? How did you not find this one?

http://www.eastern-va.com/vistaliners/tristar12.jpg

http://www.eastern-va.com/vistaliners/l10liveries.htm

Have at it  Smile
If you need someone to blame / throw a rock in the air / you'll hit someone guilty
 
YWG747
Posts: 53
Joined: Mon Feb 11, 2008 2:19 am

RE: Fs2004 Aicraft Designer Needed!

Sun Aug 24, 2008 1:31 am

Will that site work with FSX?
 
User avatar
cpd
Posts: 4548
Joined: Sat Jun 28, 2008 4:46 am

RE: Fs2004 Aicraft Designer Needed!

Sun Aug 24, 2008 3:02 am



Quoting Cc2314 (Thread starter):
I was just looking around the net and i cant find a good model of a L1011 tristar anywhere.
Would anyone be able to put together an L1011 with all the aditional cockpit parts,fmc,ins,wx radar,tcas.I would even be willing to pay up to 50euro...

For what you want, you are looking at many tens of thousands of Euros of startup costs to develop a plane from scratch up to very high standards.

Quoting ANITIX87 (Reply 1):
I'm not a FlightSim designer, but it seems like 50 Euro is way too little. I'm sure creating an aircraft takes days and days of work to perfect it.

If only it took days.  Wink It takes 6 months or more.  Sad
 
FlyB6
Posts: 10
Joined: Tue May 20, 2008 2:18 am

RE: Fs2004 Aicraft Designer Needed!

Tue Aug 26, 2008 2:39 am

My brother is a disigner contac him at rctman12@tmail.com he makes AI [;anes and can custom make u any texture u want.
 
Burkhard
Posts: 1916
Joined: Fri Nov 17, 2006 9:34 pm

RE: Fs2004 Aicraft Designer Needed!

Wed Aug 27, 2008 12:15 pm

The models around on the net by Mike Stone as example are for sure 3 months of work. If this isn't enough for your purpose, you need at least for times that for FS9, and FSX design is 3 times more work again - So if you say 50 000 €uro you might get something costum built.

Even simple AI models, without cockpit, without any inner model, are around 400 hours of work for FSX, was around 40 for FS8 and 80 for FS9. The explosion of work comes from the many more options available today. For FS8 you gave something a name "tire" and it turned. For FSX you have to animated the movement and assign animation tags, which makes every simple step from 30 seconds to 5 minutes.
 
cc2314
Posts: 82
Joined: Tue Jan 08, 2008 1:15 pm

RE: Fs2004 Aicraft Designer Needed!

Wed Aug 27, 2008 2:32 pm

Im not asking for the aircraft to be made from scratch,maybe i should have added that to the original post;-(
I have a model of an L1011 its basic with out any of the indepth instruments(fmc,ins,wx radar,tcas etc.I know you can get a tcas guage from ultimate traffic,i have already downloaded a wx radar i think its from collins,then all i need to add is the civa ins system,,So if someone could put all these together for me i would be greatfull,,Im sure that wouldnt cost 50k
 
Burkhard
Posts: 1916
Joined: Fri Nov 17, 2006 9:34 pm

RE: Fs2004 Aicraft Designer Needed!

Thu Aug 28, 2008 5:52 am

No, it wont, we misunderstood this. I have no idea though if and how the different systems, when you download them, integrate nicely, but am no cockpit expert. Maybe once I have time in a few years when there is nothing left on a.net to be modelled.
 
cc2314
Posts: 82
Joined: Tue Jan 08, 2008 1:15 pm

RE: Fs2004 Aicraft Designer Needed!

Tue Sep 02, 2008 12:32 am

Thanks for the help!!

Who is online

Users browsing this forum: No registered users and 13 guests