GBOAB
Topic Author
Posts: 353
Joined: Mon Mar 22, 2004 12:29 am

Any Chance Of Saving These Rejections

Wed Jul 27, 2005 12:38 am

Hi

Had these 2 rejected for Badblury, I have tried some extra USM but then I get jaggies along the wing edges, is there a way of sharpening the nose without adding it to the wing?

Persevere or bin them?

Any help would be appreciated

Ian

http://www.airliners.net/addphotos/rejections/big/9mmpj170705ik.jpg
http://www.airliners.net/addphotos/rejections/big/gvatl170705ik.jpg
Concorde's gone but not forgotten
 
DLKAPA
Posts: 7962
Joined: Wed Dec 03, 2003 10:37 am

RE: Any Chance Of Saving These Rejections

Wed Jul 27, 2005 12:44 am

First one, persevere, use this sharpening technique:
http://www.rockymountainavphotos.com...kflows/Progressive/Progressive.htm
And all at once the crowd begins to sing: Sometimes the hardest thing and the right thing are the same
 
timdegroot
Posts: 3258
Joined: Wed Apr 24, 2002 10:37 pm

RE: Any Chance Of Saving These Rejections

Wed Jul 27, 2005 12:58 am

Use higher shutterspeeds next time.

Cheers
Tim
Alderman Exit
 
Psych
Posts: 2944
Joined: Tue Nov 16, 2004 1:17 am

RE: Any Chance Of Saving These Rejections

Wed Jul 27, 2005 1:49 am

I really like what you have tried to achieve here, Ian. It looks like you have almost nailed that Malaysian shot.

I presume you must need a seriously fast shutter speed to get such shots completely sharp. Have you tried the sharpening tool? (looks like a triangle) - easy to apply selective sharpening to specific aspects of the image. But I wonder whether, in these examples, you are going to be stumped because there is actual blur (however slight) in the originals.

A really good attempt though.

All the best.

Paul
 
GBOAB
Topic Author
Posts: 353
Joined: Mon Mar 22, 2004 12:29 am

RE: Any Chance Of Saving These Rejections

Wed Jul 27, 2005 2:53 am

Hi all

Thanks Eric I will give it a try

Tim

I had the camera set to F8 in AV mode, The camera selected 1/320 for the Malaysian & 1/500 for the Virgin, obviously too slow for what I was trying to achieve

Paul

Thanks for your comments, maybe it has too much blur to correct, but will play around with it for a while.

Cheers

Ian
Concorde's gone but not forgotten

Who is online

Users browsing this forum: No registered users and 3 guests