frippe
Posts: 185
Joined: Sat Sep 17, 2005 4:24 pm

Help With Rejection (Centered), Please!

Thu Dec 29, 2005 4:29 pm

Can this photo be corrected in any way to avoid being badly centered? I guess I zoomed in pretty well with 600 mm, but there is some room to correct the crop.
Thanks
Frippe
PS It was sent in as DARK.

http://www.airliners.net/addphotos/r.../big/20051229_SEIVE2156netDEF2.jpg
 
tristar501
Posts: 88
Joined: Wed Feb 18, 2004 2:43 am

RE: Help With Rejection (Centered), Please!

Thu Dec 29, 2005 7:12 pm

Hi Frippe,
IMO there's too much space in front of the nose.

Cheers and good luck,
Andreas
I don't re-upload ...
 
dc10tim
Posts: 1380
Joined: Mon Jan 03, 2005 12:21 am

RE: Help With Rejection (Centered), Please!

Thu Dec 29, 2005 8:59 pm

Hi Frippe,

Quoting Tristar501 (Reply 1):
IMO there's too much space in front of the nose.

I agree with Andreas and some might also say that it is a little low in the frame too. Nice shot though!

Tim.

Edit: Just noticed the props, so it's ok vertically. Just a little too much space before the nose  Smile

[Edited 2005-12-29 13:01:00]
Obviously missing something....
 
frippe
Posts: 185
Joined: Sat Sep 17, 2005 4:24 pm

RE: Help With Rejection (Centered), Please!

Thu Dec 29, 2005 9:12 pm

Thanks a lot to both of You, Andreas and Tim, so far.
Let me comment that my problem among others is the propellers. If they are counted in as part of the motive, then the whole aircraft should be much lover in the frame, or am I completely wrong. If the are not, then they just add to the frame what Tim sad about it vertically.
Frippe

[Edited 2005-12-29 13:23:49]
 
tristar501
Posts: 88
Joined: Wed Feb 18, 2004 2:43 am

RE: Help With Rejection (Centered), Please!

Thu Dec 29, 2005 10:47 pm

I would say vertically it's OK. The propellers are part of the motive, but they are not so important to move the whole aircraft lower.
I would just crop the pic tighter to get rid of the dead space in front of the nose, nothing else.

Cheers,
Andreas  Smile
I don't re-upload ...

Who is online

Users browsing this forum: ilyamartemianov, tonyb and 3 guests