KFLLCFII
Topic Author
Posts: 3179
Joined: Sat Sep 11, 2004 7:08 am

Soft? Where?

Thu Apr 20, 2006 7:51 am

http://www.airliners.net/addphotos/rejections/big/20060419_KFLLCFII189.jpg

So what was it, the very very very tip of the nose?
"About the only way to look at it, just a pity you are not POTUS KFLLCFII, seems as if we would all be better off."
 
User avatar
clickhappy
Posts: 9042
Joined: Thu Sep 13, 2001 12:10 pm

RE: Soft? Where?

Thu Apr 20, 2006 8:00 am

The whole thing looks soft to this screener...
 
JAT74L
Posts: 606
Joined: Sat May 29, 2004 5:37 pm

RE: Soft? Where?

Thu Apr 20, 2006 8:03 am

I'm struggling with the soft/sharp thing at the moment and thinking my monitor may be the problem but, IMHO the nose/cockpit area looks softer than the titles and cabin windows.

regards

John
I like trains just as much as planes but trains don't like the Atlantic!
 
User avatar
ZSOFN
Posts: 1379
Joined: Fri Jun 24, 2005 5:20 pm

RE: Soft? Where?

Thu Apr 20, 2006 8:27 am

Quoting JAT74L (Reply 2):
MHO the nose/cockpit area looks softer than the titles and cabin windows.

That's what I'm seeing too. I'm sure it can be rectified with some selective sharpening; it's a nice image.
 
TransIsland
Posts: 1826
Joined: Wed Mar 03, 2004 9:22 pm

RE: Soft? Where?

Thu Apr 20, 2006 8:58 am

Quoting Clickhappy (Reply 1):
The whole thing looks soft to this screener...

I agree - not that I would dare disagree with Clickhappy  Wink

IMHO, it does become softer the further left you go, i.e. the nose is prolly the softest point. Did you crop a lot off the right side?
I'm an aviation expert. I have Sky Juice for breakfast.
 
KFLLCFII
Topic Author
Posts: 3179
Joined: Sat Sep 11, 2004 7:08 am

RE: Soft? Where?

Thu Apr 20, 2006 9:07 am

Thanks for all the comments  thumbsup 

Quoting TransIsland (Reply 4):
Did you crop a lot off the right side?

No: The edge of the original frame only ends at the right side of the "T" in Transat. I cropped it at the end of "Air" because it provided the cleanest crop between the lettering.

Bryan
"About the only way to look at it, just a pity you are not POTUS KFLLCFII, seems as if we would all be better off."
 
glennstewart
Posts: 952
Joined: Fri Jun 13, 2003 9:11 am

RE: Soft? Where?

Thu Apr 20, 2006 9:12 am

I concur with Royal (Clickhappy)....

This is a fairly easy one with regards to softness. It's soft - and fortunately, it's an easy fix. I'd go one extra and suggest a dash of contrast would be nice too.
Respected users.... If my replies are useful, then by all means...
 
eadster
Posts: 2125
Joined: Tue Jan 25, 2005 7:31 pm

RE: Soft? Where?

Thu Apr 20, 2006 9:48 am

Quoting Clickhappy (Reply 1):
The whole thing looks soft to this screener...

And to a non-screener...

As Glenn said, easy fixed and we'll expect to see it in the DB soon.
 
KFLLCFII
Topic Author
Posts: 3179
Joined: Sat Sep 11, 2004 7:08 am

RE: Soft? Where?

Fri Apr 21, 2006 2:27 am

Quoting KFLLCFII (Reply 5):
The edge of the original frame only ends at the right side of the "T" in Transat.

Let me rephrase that: The edge of the original frame only ends at the right side of the first "T" in Transat.
"About the only way to look at it, just a pity you are not POTUS KFLLCFII, seems as if we would all be better off."
 
fergulmcc
Posts: 1877
Joined: Thu Oct 14, 2004 8:36 pm

RE: Soft? Where?

Fri Apr 21, 2006 2:31 am

Quoting Clickhappy (Reply 1):
The whole thing looks soft to this screener

Mee too and I am no screener Big grin

Take care

Fergul  sun 
Zambian Airways, Where the Eagles fly free!!

Who is online

Users browsing this forum: No registered users and 2 guests